USB104 A7 FPGA Development Board (410-398) - FPGA development kit with Artix-7 100T chip
ID: 580586
zł2,314.61
Tax included
zł1,881.80 tax excl.
Development kit with Artix-7 100T FPGA chip, compatible with the PC/104 standard. The set is equipped with 512 MB DDR3 memory, Zmod port and Pmod ports. Digilent 410-398
Description
Development kit with Artix-7 100T FPGA chip, compatible with the PC/104 standard. The FPGA contains 101,440 logical cells. The set is equipped with DDR3 512 MB and Quad-SPI 16 MB memory for storing FPGA configuration. The module is expandable thanks to the SYZYGY compatible Zmod port and Pmod ports. Built-in USB hub and controller conveniently connect USB104 A7 with JTAG, UART and Parallel Data Interface (DPTI). DPTI data transfer interface provides data transfer from host to FPGA and can be easily managed with Digilent Adept 2. USB104 A7 is ideal for projects with limited size, weight and power.
| 1. Xilinx Artix-7 FPGA | 8. User Buttons and LEDs |
| 2. Micron DDR3 Memory | 9. SYZYGY VIO Power Good Indicator LED |
| 3. Barrel Jack for External Power Supply | 10. Zmod/SYZYGY Port |
| 4. Power Good Indicator LED | 11. Mode Select Switches |
| 5. Programming Done LED | 12. USB Hub Configured Indicator LED |
| 6. FPGA Programming Reset Button | 13. USB JTAG/UART and Data Transfer Port |
| 7. Pmod Ports |
Hardware Reference Manual is available on product website.
Features
-
Xilinx Artix-7 FPGA (XC7A100T-1CSG324I)
-
15,850 slices containing four 6-input LUTs and 8 flip-flops apiece
-
4,860 Kbits of fast block RAM
-
6 Clock Management Tiles (CMTs), each with a phase-locked loop and mixed-mode clock manager
-
240 DSP slices
-
Internal clock speeds exceeding 450MHz
-
On-chip analog-to-digital converter (XADC) for FPGA die temperature monitoring
-
Programmable over JTAG and Quad-SPI Flash
-
-
Memory
-
512 MB Micron DDR3 with 16-bit bus @ 800 or 667 MT/s depending on configurable voltage
-
16 MB Spansion Quad-SPI Flash
-
-
Power
-
Powered over USB or 5V external power source
-
-
USB
-
DPTI/DSPI Data Transfer Interface
-
USB-JTAG Programming Circuitry
-
USB-UART Bridge
-
-
Zmod Port
-
One ports following the SYZYGY Standard interface specification
-
Compatible with a variety of SYZYGY pods, allowing for a wide variety of applications
-
Dedicated differential clocks for input and output
-
8 differential I/Os
-
16 single-ended I/Os
-
DNA interfaces connected to Platform MCU allowing for various auto-negotiated power supply configurations
-
-
Pmod Ports
-
3 twelve-pin ports with a total of 24 FPGA-connected I/Os
-
-
User GPIO
-
2 push-buttons
-
4 LEDs
-
Kit contains
- USB104 A7-100T kit with four distances
- USB 2.0 AB 1.5m cable
- 30W (5V, 6A) power supply with EU adapter
580586
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
High-speed communication module powered by ADM582E. By communicating with the device via UART, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps. 410-310
zł219.80
24h
Available quantity: 1
Available
The Pmod BLE module is a Bluetooth module with powerful capabilities. Thanks to communication via the UART port, the module can be connected to any platform equipped with this interface. The module is equipped with the Roving Networks RN4870 system, in which a full Bluetooth interface is built-in. Digilent 410-359
zł167.51
24h
Available quantity: 1
Available
Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)
zł1,344.41
Delivery date unknown
No product available!
Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397
zł647.15
Delivery date unknown
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with converter Zmod ADC 1410 and Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036
zł3,572.25
Delivery date unknown
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod ADC 1410 plugged into the SYZYGY interface connector. Digilent 471-036-1
zł4,586.19
Delivery date unknown
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036-2
zł3,770.38
Delivery date unknown
No product available!
Other products in the same category (16)
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
zł911.23
4 weeks
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with converter Zmod ADC 1410 and Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036
zł3,572.25
3 weeks
No product available!
Module with Xilinx Kintex-7 XC7K70T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF
zł2,011.30
4 weeks
No product available!
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292
zł1,945.81
3 weeks
No product available!
ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux®, Android®, Windows®, or other OS/RTOS based design. 410-248
zł3,299.00
24h
Available quantity: 5
Available
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L
zł1,237.91
4 weeks
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C
zł2,372.72
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
zł3,628.94
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
zł1,488.67
4 weeks
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod ADC 1410 plugged into the SYZYGY interface connector. Digilent 471-036-1
zł4,586.19
3 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-02-325-2CF
zł2,950.12
4 weeks
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001C
zł4,129.66
3 weeks
No product available!
DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7
zł409.31
24h
Available quantity: 2
Available
Development kit with FPGA Artix-7 100T equipped with 512 MB DDR3 memory, Zmod port and Pmod ports and two-channel ADC Zmod Scope 1410-105 converter. Digilent 471-047
zł3,373.34
3 weeks
No product available!
Basys3 is an entry-level FPGA board designed exclusively for the Vivado Design Suite, featuring Xilinx Artix 7-FPGA architecture. 410-183
zł744.13
24h
Available quantity: 4
Available
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-A
zł6,539.21
3 weeks
No product available!
Development kit with Artix-7 100T FPGA chip, compatible with the PC/104 standard. The set is equipped with 512 MB DDR3 memory, Zmod port and Pmod ports. Digilent 410-398