Digilent Cora Z7-07S Kit (410-370)
ID: 572647
5906623491551
zł843.67
Tax included
zł685.91 tax excl.
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)
Description
Cora Z7 from Digilent is a cheap and easy-to-use programming platform designed on the basis of Xilinx's Zynq-7000 System-on-Chip system (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. This provides the ability to surround the processor with a unique set of software peripherals and controllers tailored to the target application.
The wide range of Cora Z7 hardware interfaces, from Ethernet PHY 1 Gb / s converters to analog-digital converters and general purpose input / output pins makes it an ideal platform for developing a wide range of embedded applications. The small housing and mounting holes make the Cora Z7 ready for use as part of a larger solution. Thanks to the built-in SD, Ethernet and Power card slot, the Cora Z7 solution can operate independently of the host computer.
properties
- ZYNQ processor
- A single-core 667 MHz Cortex-A9 processor
- Programmable FPGA logic corresponding to Artix-7 FPGA
- 3600 programmable logical clusters
- 60 DSP clusters
- 225 KB block RAM
- DDR3 memory controller with 8 DMA channels and 4 high-performance AXI3 slaves
- Broadband peripheral controllers: 1G Ethernet, USB 2.0, and SDIO
- Low-band peripheral controllers: SPI, UART, CAN, I2C
- Two-channel, 1 internal analogue-digital MSPS converter
- Programmable with JTAG and microSD card
- Memory
- 512 MB of DDR3 memory with a 16-bit bus at 1050 Mb / s
- microSD slot
- Powered by USB or any external 4.5 ... 5.5V power source
- USB and Ethernet
- Gigabit Ethernet PHY with a 48-bit globally unique identifier compatible with EUI-48/64 available on the sticker
- USB-JTAG programming circuits
- USB-UART bridge
- USB OTG PHY (only supports host)
- Two buttons
- Two RGB LEDs
- Expansion connectors
- Two Pmod connectors - 16 All I / O FPGAs
- Arduino / chipKIT Shield connector
- Up to 49 digital inputs / outputs FPGA
- 6 analog inputs 0 ... 3.3V to XADC
- 8 differential 0 ... 1,0V analog inputs to XADC
- 12 additional digital FPGA inputs / outputs
Description of the system's I / O
| Number | Description | Number | Description |
|---|---|---|---|
| 1 | Power selection jumper (external / USB) | 11 | MicroSD socket |
| 2 | Power connector | 12 | USB host port |
| 3 | USB JTAG / UART port | 13 | FPGA LED |
| 4 | Extension connector | 14 | CPU reset button |
| 5 | Pmod connector | 15 | Ethernet port |
| 6 | SPI (Arduino / ChipKIT) | 16 | POWER ON button |
| 7 | Arduino / ChipKIT connector | 17 | LED power |
| 8 | Jumper of programming mode (JTAG / microSD) | 18 | Zynq-7000 |
| 9 | User's LED | 19 | DDR3L memory |
| 10 | User button |
572647
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Ready-to-use development platform designed around the Zynq-7000 All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. Digilent 410-346-20
zł2,064.83
Delivery date unknown
No product available!
Arty S7-50 is a development kit with Xilinix FPGA XC7S50-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
zł1,104.88
24h
Available quantity: 2
Available
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-10 (410-370-1)
zł2,175.80
24h
Available quantity: 2
Available
Other products in the same category (16)
FPGA development board with Xilinx Spartan-6 FPGA. Designed for a wide variety of applications. Numato Lab FPGA008A-SS
zł896.46
3 weeks
No product available!
Development board FPGA PYNQ-Z1 and accessor set. Includes base plate, power supply, cables and SD card with system image for PYNQ-Z1. Digilent 240-114-1
zł2,355.40
24h
Available quantity: 2
Available
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
zł3,628.94
4 weeks
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
zł950.83
4 weeks
No product available!
Image processing kit on the ZedBoard development board. The kit includes a Zedboard board, an adapter and four Pcam cameras. Digilent 471-034-1
zł4,881.86
3 weeks
No product available!
The Digilent Genesys 2 board is an advanced, high-performance, ready-to-use digital circuit development platform based on the powerful Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. 410-300
zł6,451.46
3 weeks
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
zł1,394.68
4 weeks
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-A
zł6,539.21
3 weeks
No product available!
DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7
zł437.97
3 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60
4 weeks
No product available!
Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. The set works under the control of Linux. Digilent Eclypse Z7 (410-393)
zł3,121.91
3 weeks
No product available!
Module with Xilinx Kintex-7 XC7K70T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF
zł1,344.00
4 weeks
No product available!
FPGA development board with Kintex 7 FPGA system and FT2232H two-channel USB converter from FTDI. Numato Lab FPGA010A-SS
zł2,445.78
3 weeks
No product available!
FPGA development board with Xilinx Artix-7 FPGA. Equipped with 24 GB of DDR3 SDRAM memory and an Edge Rate Rugged High-Speed male connector. Numato Lab NLFX1009
zł9,833.91
3 weeks
No product available!
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1
zł1,794.74
3 weeks
No product available!
FPGA development board with Xilinx Artix-7 XC7A100T. Designed for a wide variety of applications. Numato Lab FPGA009-SS
zł2,457.75
3 weeks
No product available!
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)