The USRP B200 is a compact platform that is suitable for both hobby and OEM applications. It was designed by Ettus Research and provides a wide frequency range (from 70 MHz to 6 GHz) and a user programmable, industrial Xilinx Spartan-6 XC6SLX75 FPGA chip. The USRP can both transmit and receive RF signals.
The module uses Analog Devices AD9364 RFIC transceiver with 56 MHz bandwidth. The signal processing and control of the AD9364 is done by a Spartan-6 XC6SLX75 FPGA chip connected to a computer via SuperSpeed USB 3.0. The real-time USRP B200 system throughput will be up to 61.44 MS / s, providing a full 56 MHz instantaneous RF bandwidth.
The module uses the USRP Hardware Driver (UHD). It is a library that runs on a general purpose processor (GPP) and communicates with and controls all devices from the USRP family, and allows you to prototype your own GSM base station with OpenBTS. UHD enables programming with C/C++ as well as Python API and offers support for many platforms, development environments and frameworks, including RFNoC, GNU Radio, LabVIEW and Matlab / Simulink. The driver is available for Linux, Windows and Mac OS. UHD provides the necessary control during the transfer of the sample waveform to and from the USRP equipment, and controls various parameters (e.g., sampling rate, center frequency, gains, etc.) of the radio.
The board was placed in a metal protective enclosure. The kit comes with a guide to help you get started with the kit.
Manufacturer
Responsible person
The board features a Zynq XC7Z020, Ethernet, HDMI in/out, MIC in, Audio out, Arduino Interface, 2 Pmods, 16 pin GPIO header, user LEDs, pushbuttons and Switches. 6003-410-0
Arty S7-50 is a development kit with Xilinix FPGA XC7S50-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
Arty S7-25 is a development kit with Xilinx FPGA XC7S25-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
No product available!
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)
Development Kit Artix-7 256 MB DDR3L, 16 MB Quad-SPI flash memory, programming via JTAG
No product available!
Development board FPGA with ZYNQ XC7Z020-1CLG400C system, built-in USB, audio / video interfaces, JTAG programmer and compatible connector Arduino UNO R3 and Raspberry Pi. The set works with the open-source PYNQ project that combines FPGA with Python. TUL PYNQ-Z2
No product available!
DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7
Development board FPGA PYNQ-Z1 and accessor set. Includes base plate, power supply, cables and SD card with system image for PYNQ-Z1. Digilent 240-114-1
Evaluation kit equipped with Xilinx Artix 7 XC7A35T-1C FPGA chip and 256 MB DDR3 RAM. The kit is supported by Vivado and the Verilog and Lucid languages. SparkFun DEV-16527
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with enclosure. Digilent 471-042
Development board with Xilinx Artix 7 chip equipped with M.2 connector. It offers a PCIe Gen2 interface and DDR3 2 Gb memory. Numato Lab NLFX1006
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-A
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-B
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-C
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001A
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001B
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with enclosure. Digilent 471-042