USB104 A7 FPGA Development Board (471-047) - FPGA development kit with Artix-7 100T + Zmod Scope 1410-105

Description

A development kit containing a development board with the Artix-7 100T chip compatible with the PC/104 standard and a two-channel ADC Zmod Scope 1410-105 converter.

The FPGA contains 101,440 logical cells. The set is equipped with DDR3 512 MB and Quad-SPI 16 MB memory for storing FPGA configuration. The module is expandable thanks to the SYZYGY compatible Zmod port and Pmod ports. Built-in USB hub and controller conveniently connect USB104 A7 with JTAG, UART and Parallel Data Interface (DPTI). DPTI data transfer interface provides data transfer from host to FPGA and can be easily managed with Digilent Adept 2. USB104 A7 is ideal for projects with limited size, weight and power. Hardware Reference Manual is available on product website.

Zmod Scope 1410-105 is a dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25 V signals with 14-bit resolution and sampling frequency up to 100 MS/s. Analog inputs can be connected to the module via SMA connectors. Analog Zmod ADC is based on the AD9648 chip. The board is responsible for configuring the internal registers of the ADC circuit, providing the clock and receiving data. The manufacturer also provides documentation for the module.

Features

USB104 A7 FPGA Development Board

• Xilinx Artix-7 FPGA (XC7A100T-1CSG324I)
  • 15,850 slices containing four 6-input LUTs and 8 flip-flops apiece
  • 4,860 Kbits of fast block RAM
  • 6 Clock Management Tiles (CMTs), each with a phase-locked loop and mixed-mode clock manager
  • 240 DSP slices
  • Internal clock speeds exceeding 450MHz
  • On-chip analog-to-digital converter (XADC) for FPGA die temperature monitoring
  • Programmable over JTAG and Quad-SPI Flash
• Memory
  • 512 MB Micron DDR3 with 16-bit bus @ 800 or 667 MT/s depending on configurable voltage
  • 16 MB Spansion Quad-SPI Flash
• Power
  • Powered over USB or 5V external power source
• USB
  • DPTI/DSPI Data Transfer Interface
  • USB-JTAG Programming Circuitry
  • USB-UART Bridge
• Zmod Port
  • One ports following the SYZYGY Standard interface specification
  • Compatible with a variety of SYZYGY pods, allowing for a wide variety of applications
  • Dedicated differential clocks for input and output
  • 8 differential I/Os
  • 16 single-ended I/Os
  • DNA interfaces connected to Platform MCU allowing for various auto-negotiated power supply configurations
• Pmod Ports
  • 3 twelve-pin ports with a total of 24 FPGA-connected I/Os
• User GPIO
  • 2 push-buttons
  • 4 LEDs

Zmod Scope 1410-105

• Channels: 2
• Channel type: single-ended
• Resolution: 14-bit
• Input range: ±1V (High Gain) or ±25V (Low Gain)
• Absolute Resolution 0.13mV (High Gain) or 3.21mV (Low Gain)
• Sample rate (real time): 100MS/s
• Input impedance: 1MΩ||18pF
• Analog bandwidth: 70 MHz+ @ 3dB, 30 MHz @ 0.5dB, 20 MHZ @ 0.1dB
• Input protected to: ±50V

Kit contains

• USB104 A7-100T kit with four distances
• Zmod Scope 1410-105
• USB 2.0 AB 1.5m cable
• 30W (5V, 6A) power supply with EU adapter