The USRP B200-mini is a compact platform that is suitable for both hobby and OEM applications. It was designed by Ettus Research and provides a wide frequency range (from 70 MHz to 6 GHz) and a user programmable, industrial Xilinx Spartan-6 XC6SLX75 FPGA chip. The USRP can both transmit and receive RF signals.
The module uses Analog Devices AD9364 RFIC transceiver with 56 MHz bandwidth. The signal processing and control of the AD9364 is done by a Spartan-6 XC6SLX75 FPGA chip connected to a computer via SuperSpeed USB 3.0. The real-time USRP B200 system throughput will be up to 61.44 MS / s, providing a full 56 MHz instantaneous RF bandwidth.
The module uses the USRP Hardware Driver (UHD). It is a library that runs on a general purpose processor (GPP) and communicates with and controls all devices from the USRP family, and allows you to prototype your own GSM base station with OpenBTS. UHD enables programming with C/C++ as well as Python API and offers support for many platforms, development environments and frameworks, including RFNoC, GNU Radio, LabVIEW and Matlab / Simulink. The driver is available for Linux, Windows and Mac OS. UHD provides the necessary control during the transfer of the sample waveform to and from the USRP equipment, and controls various parameters (e.g., sampling rate, center frequency, gains, etc.) of the radio.
The kit comes with a guide to help you get started with the kit.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX150 FPGA chip. Digilent 6002-410-021
No product available!
Aluminum enclosure dedicated to the Ettus USRP B200mini. It protects the plate against mechanical damage by increasing the operating temperature range. Digilent 6002-240-012
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-023
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with enclosure. Digilent 471-042
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001B
No product available!
DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001A
No product available!
Evaluation kit equipped with Xilinx Artix 7 XC7A35T-1C FPGA chip and 256 MB DDR3 RAM. The kit is supported by Vivado and the Verilog and Lucid languages. SparkFun DEV-16527
No product available!
Module with Xilinx Artix-7 15T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-15-1C
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-02
No product available!
The Digilent Genesys 2 board is an advanced, high-performance, ready-to-use digital circuit development platform based on the powerful Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. 410-300
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
No product available!
Development board FPGA with ZYNQ XC7Z020-1CLG400C system, built-in USB, audio / video interfaces, JTAG programmer and compatible connector Arduino UNO R3 and Raspberry Pi. The set works with the open-source PYNQ project that combines FPGA with Python. TUL PYNQ-Z2
No product available!
Development board FPGA PYNQ-Z1 and accessor set. Includes base plate, power supply, cables and SD card with system image for PYNQ-Z1. Digilent 240-114-1
Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
No product available!
Development kit with Xilinx Spartan 6 FPGA. Equipped with display, buttons, audio and video outputs and microSD slot. Numato Lab FPGA006
Arty S7-50 is a development kit with Xilinix FPGA XC7S50-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
FPGA development board with Xilinx Kintex-7 chip with 4 GB DDR3L SDRAM memory. Equipped with a fast PCIe interface. Numato Lab FPGA014C
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-022