Cmod S7 - module with Spartan-7 FPGA
search
  • Cmod S7 - module with Spartan-7 FPGA
  • Cmod S7 - module with Spartan-7 FPGA
  • Cmod S7 - module with Spartan-7 FPGA
ID: 575970
5906623491582
zł400.52
Tax included

zł325.63 tax excl.

DIP module with 36 pins, based on the Xilinx Spartan-7 FPGA chip. Provides 32 digital I/O signals and 2 analog input signals. The pins are spaced 100 miles (2.54 mm), making Cmod S7 perfect for use with breadboards. Digilent Cmod S7

3 weeks
Awaiting delivery
Kamami is the official distributor of Digilent FPGA kits, modules and measurement tools. All products of this brand in our offer are original and come directly from the manufacturer.

Description

The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.

Digilent Cmod S7 can be configured in several ways:

  • from a PC via the built-in USB programming circuit
  • from an external programmer connected to the 6-pin JTAG connector
  • from the built-in Quad-SPI flash memory

Configuration files can be prepared using Xilinx’s ISE 14.2 (or newer) software, using the "Digilent’s Adept system" or using older versions of Xilinx tools. The Xilinx’s ISE / Impact or Digilent’s Adept software should recognize the board and FPGA connected to the PC using a USB cable.

Xilinx’s iMPACT tool and Digilent’s Adept can be used to program FPGA and embedded Quad-SPI Flash memory. The documentation contains information on software and configuration.

Features

  • Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
    • 3,650 slices containing four 6-input LUTs and 8 flip-flops
    • 1,620 Kbits of fast block RAM
    • Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
    • 80 DSP slices
    • Internal clock speeds exceeding 450 MHz
    • On-chip analog-to-digital converter (XADC)
    • Programmable over JTAG and Quad-SPI Flash
  • Memory
    • 4 MB Quad-SPI Flash
  • Power
    • Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
  • USB
    • USB-JTAG programming circuitry
    • USB-UART bridge
  • Push-buttons and LEDs
    • 2 Buttons
    • 4 LEDs
    • 1 RGB LED
  • Expansion Connectors
    • 1 Pmod connector
      • 8 total FPGA I/O
    • 48-pin DIP form-factor headers
      • 36 populated pins
        • 32 total FPGA I/O
        • 2 Single-ended 0-3.3V analog inputs to XADC
575970

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)