Xilinx FPGA Programmer - JTAG-SMT3-NC MSL 6 (410-357)

Description

The JTAG-SMT3-NC module is a small, complete, surface-mounted Xilinx FPGA programmer board. It works with Xilinx takm software such as iMPACT, ChipScope ™, Vivado, and EDK. The module can be mounted on the main board as other components. It is powered by 3.3 V with the possibility of connecting other voltages to the JTAG and UART bus, between 1.8 ... 5.5 V. The maximum transmission speed by JTAG is 30 MBit / s and UART - 12 Mbaud. The D + (DP) and D- (DN) lines are led out to solder pads, which allows the designer to choose the type and location of the USB port.

properties

• A complete JTAG programmer / debugger for Xilinx FPGA circuits
• Compatible with Xilinx tools
• The USB 2.0 HS port can control the JTAG bus at up to 30 Mbit / s (user-selected speed)
• The buffer on the PS_SRST_B line allows the X-ray restoration of the Xilinx Zynq processor core restert
• The dual-channel USB controller provides simultaneous access to both the JTAG interface and the UART interface
• Possibility to set different voltages to UART and JTAG interfaces; 1.8 ... 5.5 V range
• The small surface soldering plate can be mounted directly on the target plate
• USB signals D + and D- are connected to the pads of the board; this allows you to place the USB connector on the main board
• The VBUS_DETECT line allows you to reduce the power consumption when the module is not connected to a PC
• Certificates: CE, EU RoHS, REACH