Nexys A7 Artix 50T Xilinx FPGA
ID: 573929
zł1,794.74
Tax included
zł1,459.14 tax excl.
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1
Description
The Nexys A7 evaluation kit is a platform for designing digital circuits, based on the latest programmable Artix-7 ™ gate array (FPGA) from Xilinx. Thanks to the large capacitive FPGA matrix, external memory and numerous interfaces like USB, Ethernet and other ports, the Nexys A7 can handle projects from pre-combining systems to advanced embedded processors. Several built-in peripherals, including an accelerometer, temperature sensor, MEMS digital microphone, loudspeaker amplifier and several I / O devices, allow you to create a wide range of projects without the need for other components.
Nexys Video is compatible with both the ISE and Vivado tool libraries. It is supported in the free versions of these two WebPACK ™ tools, which means that projects can be implemented at no additional cost. The free version of the Vivado even includes the ability to create MicroBlaze ™ microprocessor designs.
properties
- FPGA Artix-7
- 8450 programmable logic gates, each of which contains four 6-input LUTs and 8 latches
- 600 kB high speed RAM
- Five clock management systems, each with a phase locked loop (PLL)
- 120 DSP gates
- Internal clock with a speed exceeding 450 MHz
- Dual channel, 1 internal analogue-digital MSPS converter (XADC)
- Memory
- 128 MB DDR2
- Flash series
- MicroSD card slot
- Power
- Powered by USB or any external 4.5 ... 5.5 V power source
- USB and Ethernet
- 10/100 Ethernet PHY
- USB-JTAG interface
- USB-UART
- USB HID host for mice, keyboards and memory cards
- I / o user
- 16 switches
- 16 LEDs
- Two RGB LEDs
- Two 4-digit 7-segment displays
- Sound and video
- 12-bit VGA output
- PWM audio output
- PDM microphone
- Additional sensors
- 3-axis accelerometer
- Temperature sensor
- Expansion connectors
- Pmod connector for XADC signals
- Four Pmod connectors providing 32 full I / O FPGAs
Description of connectors on the board
- Power socket
- Power button
- USB host connector
- PIC24 programming port
- Ethernet connector
- FPGA programming with LED
- VGA connector
- Audio connector
- Jumper of programming mode
- Analog signal port Pmod (XADC)
- Reset button for FPGA configuration
- CPU reset button
- Five buttons
- Port of Pmod
- Temperature sensor
- JTAG port for (optional) external cable
- Tri-color LED (RGB)
- Slide switches (16)
- LED diodes (16)
- Power points
- 8-digit 7-seg screen
- Microphone
- External configuration jumper (SD / USB)
- MicroSD card slot
- Shared UART / JTAG USB port
- Power selection jumper and battery connector
- Power LED
- Xilinx Artix-7 FPGA
- DDR2 memory
Included
- Evaluation board Nexys A7 Artix 50T
- Micro USB cable
573929
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Nexys Video features several components that make it ideal for developing audio/video applications. The Artix-7 XC7A200T FPGA is the most powerful chip from Xilinx\'s Artix-7 family. A Mini DisplayPort source provides the board with a uni-directional, high-bandwidth, low-latency audio/video channel. (410-316)
zł4,097.40
Delivery date unknown
No product available!
The Nexys Video features several components that make it ideal for developing audio/video applications. The Artix-7 XC7A200T FPGA is the most powerful chip from the Xilinx. 410-316
zł1,884.00
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2D
zł911.23
4 weeks
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L
zł1,237.91
4 weeks
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
zł1,967.40
4 weeks
No product available!
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
4 weeks
No product available!
Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06
zł1,985.36
4 weeks
No product available!
UltraITX + base board designed to work with TE0808 UltraSOM + MPSoC modules. It allows you to connect the module to external connectors and interfaces. TEBF0808-04
zł3,983.72
4 weeks
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
4 weeks
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
zł950.83
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
zł3,628.94
4 weeks
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C
zł1,947.39
4 weeks
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C
zł2,372.72
4 weeks
No product available!
Arty S7-50 is a development kit with Xilinix FPGA XC7S50-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
zł1,104.88
24h
Available quantity: 1
Available
ZYBO Z7 is the newest addition to the popular ZYBO line of ARM/FPGA SoC Platform; it surrounds the Zynq with a rich set of multimedia and connectivity peripherals to create a formidable single-board computer, even before considering the flexibility and power added by the FPGA. Digilent 410-351-10
zł1,960.76
3 weeks
No product available!
Arty S7-25 is a development kit with Xilinx FPGA XC7S25-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)
zł491.34
3 weeks
No product available!
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)
zł843.67
24h
Available quantity: 2
Available
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-10 (410-370-1)
zł2,175.80
24h
Available quantity: 2
Available
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1