Nexys A7 Artix 100T Xilinx FPGA
ID: 573931
zł1,945.81
Tax included
zł1,581.96 tax excl.
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292
Description
The Nexys A7 evaluation kit is a platform for designing digital circuits, based on the latest programmable Artix-7 ™ gate array (FPGA) from Xilinx. Thanks to the large capacitive FPGA matrix, external memory and numerous interfaces like USB, Ethernet and other ports, the Nexys A7 can handle projects from pre-combining systems to advanced embedded processors. Several built-in peripherals, including an accelerometer, temperature sensor, MEMS digital microphone, loudspeaker amplifier and several I / O devices, allow you to create a wide range of projects without the need for other components.
Nexys Video is compatible with both the ISE and Vivado tool libraries. It is supported in the free versions of these two WebPACK ™ tools, which means that projects can be implemented at no additional cost. The free version of the Vivado even includes the ability to create MicroBlaze ™ microprocessor designs.
properties
- FPGA Artix-7
- 15850 programmable logic gates, each of which contains four 6-input LUTs and 8 latches
- 1188 kB fast RAM
- Six clock management systems, each with a phase locked loop (PLL)
- 240 DSP gates
- Internal clock with a speed exceeding 450 MHz
- Dual channel, 1 internal analogue-digital MSPS converter (XADC)
- Memory
- 128 MB DDR2
- Flash series
- MicroSD card slot
- Power
- Powered by USB or any external 4.5 ... 5.5 V power source
- USB and Ethernet
- 10/100 Ethernet PHY
- USB-JTAG interface
- USB-UART
- USB HID host for mice, keyboards and memory cards
- I / o user
- 16 switches
- 16 LEDs
- Two RGB LEDs
- Two 4-digit 7-segment displays
- Sound and video
- 12-bit VGA output
- PWM audio output
- PDM microphone
- Additional sensors
- 3-axis accelerometer
- Temperature sensor
- Expansion connectors
- Pmod connector for XADC signals
- Four Pmod connectors providing 32 full I / O FPGAs
Description of connectors on the board
- Power socket
- Power button
- USB host connector
- PIC24 programming port
- Ethernet connector
- FPGA programming with LED
- VGA connector
- Audio connector
- Jumper of programming mode
- Analog signal port Pmod (XADC)
- Reset button for FPGA configuration
- CPU reset button
- Five buttons
- Port of Pmod
- Temperature sensor
- JTAG port for (optional) external cable
- Tri-color LED (RGB)
- Slide switches (16)
- LED diodes (16)
- Power points
- 8-digit 7-seg screen
- Microphone
- External configuration jumper (SD / USB)
- MicroSD card slot
- Shared UART / JTAG USB port
- Power selection jumper and battery connector
- Power LED
- Xilinx Artix-7 FPGA
- DDR2 memory
Included
- Evaluation board Nexys A7 Artix 100T
- Micro USB cable
573931
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Nexys Video features several components that make it ideal for developing audio/video applications. The Artix-7 XC7A200T FPGA is the most powerful chip from Xilinx\'s Artix-7 family. A Mini DisplayPort source provides the board with a uni-directional, high-bandwidth, low-latency audio/video channel. (410-316)
zł4,097.40
Delivery date unknown
No product available!
The Nexys Video features several components that make it ideal for developing audio/video applications. The Artix-7 XC7A200T FPGA is the most powerful chip from the Xilinx. 410-316
zł1,884.00
24h
Available quantity: 2
Available
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1
zł1,794.74
Delivery date unknown
No product available!
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292
zł1,462.33
24h
Available quantity: 2
Available
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292
zł1,945.81
Delivery date unknown
No product available!
Other products in the same category (16)
Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. The set works under the control of Linux. Digilent Eclypse Z7 (410-393)
zł3,121.91
3 weeks
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with converter Zmod ADC 1410 and Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036
zł3,572.25
3 weeks
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod ADC 1410 plugged into the SYZYGY interface connector. Digilent 471-036-1
zł4,038.05
3 weeks
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036-2
zł3,770.38
3 weeks
No product available!
Industrial SoC module integrating Xilinx Zynq 7020 SoC, Gigabit Ethernet transceiver, 1 GB DDR3 SDRAM and 32 MB Flash memory. Trenz Electronic TE0720-03-2IF
zł1,938.34
4 weeks
No product available!
Development kit with Artix-7 100T FPGA chip, compatible with the PC/104 standard. The set is equipped with 512 MB DDR3 memory, Zmod port and Pmod ports. Digilent 410-398
zł2,314.61
3 weeks
No product available!
Evaluation kit equipped with Xilinx Artix 7 XC7A35T-1C FPGA chip and 256 MB DDR3 RAM. The kit is supported by Vivado and the Verilog and Lucid languages. SparkFun DEV-16527
zł791.64
3 weeks
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-02
zł631.22
4 weeks
No product available!
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-06
zł767.82
4 weeks
No product available!
Development kit with FPGA Artix-7 100T equipped with 512 MB DDR3 memory, Zmod port and Pmod ports and two-channel ADC Zmod Scope 1410-105 converter. Digilent 471-047
zł3,373.34
3 weeks
No product available!
Development kit with Artix-7 100T FPGA chip equipped with 512 MB DDR3 memory, Zmod port and Pmod ports and two-channel Zmod AWG 1411 DAC converter. Digilent 471-046
zł2,645.48
3 weeks
No product available!
Evaluation kit with Zynq Ultrascale + MPSoC chip, integrating ARM Cortex-A53, Cortex-R5 real-time processor, Mali-400 MP2 GPU and programmable logic. Provides a SYZYGY interface connector. Digilent 410-383-5EV
zł12,995.79
3 weeks
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-022
zł7,177.75
3 weeks
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with a enclosure. Digilent 471-044
zł7,855.94
3 weeks
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-023
zł6,937.08
3 weeks
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with enclosure. Digilent 471-042
zł9,472.25
24h
Available quantity: 1
Available
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292