AW-CB375NF wireless communication module. It supports 802.11 a/b/g/n/ac Generation 5 Wi-Fi and Bluetooth 5.0 and features an M.2 A/E Key connector. Waveshare Wireless-AW-CB375NF

Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013

Module with 1.27" OLED colour display with 128x96 resolution. It communicates via an SPI interface. Waveshare 1.27inch RGB OLED Module

Module with a GPS receiver based on the MTK3333 chip. It is equipped with a STEMMA QT connector and communicates via the UART or I2C interface. Adafruit 4415

Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002

Module with IPS LCD display with a diagonal of 1.8" and a resolution of 128x160 px. Equipped with a microSD card reader. DFRobot DFR0928

Active HDTV antenna with 28 dB amplification, supporting FullHD and 4K UltraHD standard. Designed for indoor installation. BLOW ATD40

Module with 512 kbit (64kB) EEPROM. Communication is via the I2C interface. The module has 3 jumpers to select one of 8 addresses. SparkFun COM-18355

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT

Module with EEPROM 24LC32 memory with a capacity of 32 kBit (4 kB). Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5146

Dual motor controller allowing two DC motors to be driven with voltages from 4.5 to 13.5V and a continuous current of 1.2 A per channel. SparkFun ROB-14451

100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Green Dot, 5V, RoHS

Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611

Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161

LED strip with COB diodes in green. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20

Hard disk frame HDD 2.5" in place of DVD Slim 13mm. Akyga AK-CA-56

1x6 character BIG!! with LED backlight, FSTN positive, enhanced temperature range, 1-LED 20mA, cyryllic, RoHS

8-channel voltage level converter allowing for connection of systems operating with the voltage level of 1.8 V, 2.5 V, 3.3 V and 5 V. SparkFun BOB-19626

IMX708-75 Camera NoIR is a high-resolution camera module with autofocus and night vision function, designed for Raspberry Pi projects. It offers 12 MP image quality with HDR and the ability to operate in darkness when using IR illumination, making it a suitable choice for monitoring, image recognition systems and 24/7 video recording.

Soil moisture sensor dedicated to micro:bit. It is supplied with the voltage from 3.3 V to 5 V and communicates via an analog signal. SparkFun SEN-15272