USB cable A 3.0 / USB C, 0.5 m from Kruger & Matz. KM0347

MS-DIP/SO1 PCB, SO8-SO28L to DIP8-DIP28 adapter

SMD connector, bottom contact 32pin, pitch 0.5mm

Tilt sensor 45 degrees, E-Switch, RoHS

Earth humidity sensor with analogue output, supplied with 3.3 to 5.5 V voltage with Gravity connector. DFRobot SEN0193

The adapter is used to transform the mini USB port into a USB type A socket. Thanks to it, you can connect devices such as external drives, memory cards or USB adapters for smartphones and tablets with OTG function. OTG technology allows direct data transfer between mobile devices and USB without the need to connect to a computer. Akyga AK-AD-07

IDC 2.54 mm 16P plug dedicated to creating permanent signal connections in electronic systems, prototypes and automation systems. Standard pin spacing ensures easy integration with a wide range of devices. conIDC-16P-A

Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767

The 2x40W Bluetooth amplifier module XY-P40W is a versatile audio amplifier with a wide voltage range and Bluetooth 5.0 compatibility, enabling wireless audio transmission at a distance of up to 15 meters. It has protective mechanisms that make it not only a powerful but also a safe tool for designing your own audio devices.

Female-female cable, 10 cm long, with JST-SH 6-pin plug on both sides. Suitable for micro DC motor encoders with gear. Pololu 4765

Access line ultra-low-power 32-bit MCU ARM®-based Cortex®-M0+, 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, ADC, LQFP48, RoHS

Module with a bidirectional converter for the I2C bus, based on the PCA9306 system. It allows you to connect two I2C modules operating with different voltage levels. SparkFun BOB-15439

This electromagnetic transducer is a compact way to add sound to your embedded project. Pololu 1484

Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle

Brushless DC motor (BLDC) driver. It can operate motors powered with a voltage from 6 to 20 V with a current consumption of up to 3 A

LED strip with COB diodes in golden yellow. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20

Micro SD 64GB class 10 card with Linux Raspberry Pi OS for RPi (old Raspbian)

Connector housing, 1x16, 2,54mm, for wire, RoHS. Set of 10 pieces

2-position waterproof momentary rotary switch, 19 mm in diameter, in a stainless steel housing. Green colour