- New
zł26.22 tax excl.
Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Standard version - without USB Type-C adapter board and FPC cable. Waveshare ESP32-S3-Tiny-N8R8
ESP32-S3-Tiny-N8R8 is a compact development board designed for AIoT applications, based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 featuring a dual-core Xtensa 32-bit LX7 processor with operating frequency up to 240 MHz. The chip integrates 512 kB SRAM and 384 kB ROM and provides advanced connectivity through 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE with Bluetooth Mesh support.
The N8R8 version is equipped with 8 MB Flash and 8 MB PSRAM, enabling development of advanced applications including edge AI processing, data handling and memory-intensive IoT systems. The chip supports multiple low-power operating modes, allowing optimization of power consumption depending on the application scenario.
The board provides 34 multifunction GPIO pins configurable for SPI, I2C, UART, ADC and PWM interfaces. An onboard 8 PIN FPC connector with 0.5 mm pitch allows connection of a USB Type-C adapter board (not included). Castellated holes and gold-plated pads facilitate integration into end products.
The board includes a ME6217C33M5G 3.3 V voltage regulator with output current up to 800 mA, a WS2812 RGB LED, a power indicator LED and BOOT and RESET buttons.


Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Version with USB Type-C adapter board and FPC cable included. Waveshare ESP32-S3-Tiny-N8R8-Kit
No product available!
Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Equipped with a STEMMA QT connector. Adafruit 5401
No product available!
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
Tile with WiFi module and Bluetooth Classic + BLE ESP32 Pico. It offers 8 MB of Flash memory and 2 MB of PSRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5395
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Adafruit 5398
No product available!
Board with the WiFi Espressif ESP32-S3 module. It offers 8 MB of Flash memory and 512 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5426
MCU module combining Wi-Fi and Bluetooth technologies (BR/EDR + BLE). Designed for a wide variety of IoT applications, from sensor networks to more demanding tasks such as voice encoding, music streaming, and MP3 decoding. Espressif ESP32-WROOM-32D 32MBit
No product available!
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991054
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
Versatile communication module based on the ESP32 microcontroller, designed for industrial automation and as an IoT gateway for PLCs. It supports fieldbus standards such as CAN and RS485, as well as wireless technologies Wi-Fi, BLE and 4G LTE, which enables integration with industrial networks and the cloud. Thanks to its rugged design and support for programming in ESP-IDF, the EdgeBox-ESP-100 is suitable for remote control and monitoring in harsh industrial environments. Seeed Studio 102991735
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Standard version - without USB Type-C adapter board and FPC cable. Waveshare ESP32-S3-Tiny-N8R8