ESP32-S3 development board with 1.75-inch round AMOLED display, WiFi and Bluetooth - Waveshare 31261
ID: 1198949
5902186322677
zł148.72
Tax included
zł120.91 tax excl.
ESP32-S3-Touch-AMOLED-1.75 is a standard ESP32-S3 development board with an AMOLED display, touch, microphones, sensors, and Wi-Fi/Bluetooth support. It is suitable for building compact IoT and HMI devices where touch interaction, wireless communication, and audio support are essential.
Description
ESP32-S3-Touch-AMOLED-1.75 is the standard version of the development board with a 1.75-inch AMOLED display at a resolution of 466×466 pixels. The device is based on the ESP32-S3R8 microcontroller with a dual-core Xtensa LX7 processor running up to 240 MHz, offering 2.4 GHz Wi-Fi and Bluetooth 5.0 LE support. The board integrates a touchscreen with a CST9217 panel, 16 MB Flash, 8 MB PSRAM, and a rich set of peripherals, making it well-suited for prototyping IoT devices, HMI, and interactive projects.
Onboard features include: a 6-axis QMI8658 sensor (accelerometer and gyroscope), PCF85063 RTC, two MEMS microphones with ES7210 echo cancellation, audio codec, microSD slot, and MX1.25 connector for an optional 3.7 V Li-ion battery. Power and programming are provided via the USB-C port. Thanks to its compact size and support for ESP-IDF and Arduino IDE, the board is a versatile solution for modern mobile and embedded applications.
Properties
- Microcontroller: ESP32-S3R8, Xtensa LX7 dual-core, up to 240 MHz
- Memory: 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, 16 MB Flash
- Display: 1.75" AMOLED, 466×466 resolution, 16.7M colors
- Display driver: CO5300, touch panel CST9217 (I2C)
- IMU sensor: QMI8658 (3-axis accelerometer + 3-axis gyroscope)
- RTC: PCF85063 powered by AXP2101 PMIC
- Microphones: dual MEMS microphones with ES7210 echo cancellation
- Audio: codec, MX1.25 speaker connector, 8Ω 2W speaker included
- Connectivity: Wi-Fi 2.4 GHz (802.11 b/g/n), Bluetooth 5.0 LE, BLE Mesh
- Interfaces: USB-C, microSD slot, 8-pin 2.54 mm (GPIO, UART, I2C, extensions)
- Power: USB-C or 3.7 V Li-ion battery (MX1.25, charge/discharge supported)
- Buttons: PWR and BOOT (programmable)
- Support for ESP-IDF and Arduino IDE
- Dimensions: 48.96 × 10.40 mm
Included in the set
- ESP32-S3-Touch-AMOLED-1.75 ×1
- 8Ω 2W speaker ×1
1198949
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2
Regular pricezł194.99zł166.10
24h
Available quantity: 1
Available
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3
Regular pricezł244.91zł208.57
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
zł48.89
24h
Available quantity: 8
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
zł53.96
24h
Available quantity: 3
Available
Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard
zł26.94
4 weeks
No product available!
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
zł127.44
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
zł128.22
24h
Available quantity: 1
Available
Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985
zł228.60
24h
Available quantity: 1
Available
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
zł9.21
4 weeks
No product available!
Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32E 32MBit (4MB)
zł19.08
1 weeks
No product available!
M5Stack series kit equipped with ESP32 and camera with OV3660 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121-B-V11
zł220.44
1 weeks
No product available!
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430
zł87.86
24h
Available quantity: 1
Available
Development board with WiFi and Bluetooth ESP32 module. It has been equipped with industrial interfaces RS485 and CAN. TTGO T-CAN485 ESP32
zł91.24
4 weeks
No product available!
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96
zł59.72
24h
Available quantity: 9
Available
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
zł70.48
24h
Available quantity: 5
Available
ESP32-S3-Touch-AMOLED-1.75 is a standard ESP32-S3 development board with an AMOLED display, touch, microphones, sensors, and Wi-Fi/Bluetooth support. It is suitable for building compact IoT and HMI devices where touch interaction, wireless communication, and audio support are essential.