ESP32-S3 Matrix development board with 8×8 RGB LED matrix - Waveshare 27119

M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B

ESP32-S2-DevKitC-1-N8R2 is an evaluation board designed for developing IoT applications using 2.4 GHz Wi-Fi. It features a high-performance microcontroller, large Flash and PSRAM memory, and a wide range of communication interfaces. With an integrated antenna, micro USB connector, and full access to GPIOs, it serves as a versatile tool for embedded system designers, automation engineers, and electronics enthusiasts.

A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484

Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575

The ESP32-P4-NANO-KIT-B set is a high-performance development tool designed for building advanced IoT devices, user interfaces, and edge data processing systems. With support for PoE and wireless connectivity via Wi-Fi 6 and Bluetooth 5, the product offers integration flexibility and a high level of reliability in demanding application environments. Particularly recommended for prototyping HMI devices, IoT gateways, and communication nodes.

The ESP32-S3-LCD-1.9 board without a touch panel integrates the ESP32-S3R8 microcontroller, a 1.9" LCD display (170×320 px), and a set of peripherals such as a 6-axis IMU, TF card slot, and battery connector. This version includes an RGB WS2812 LED and enables the development of HMI applications, gesture control, motion recording, or interface creation using libraries such as LVGL. Thanks to compatibility with the Raspberry Pi Pico pin layout, the product is perfectly suited as a base for complex electronics and robotics projects.

Evaluation board with the ESP32-S2-SOLO-U-N4R2 module enables the development of 2.4 GHz wireless Wi-Fi applications, offering integrated Flash and PSRAM memory as well as the option to use an external antenna. Thanks to a wide range of interfaces and a high number of available GPIOs, it is suitable for IoT projects, building automation, remote control systems, as well as wearable devices and distributed measurement systems.

Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano

A development board based on a dual-core RISC-V 400 MHz processor, supporting AI instructions, MIPI-CSI/DSI interfaces, and enabling image and voice processing. With an integrated ESP32-C6 module, it offers Wi-Fi 6 and Bluetooth 5 connectivity, as well as a USB OTG interface, microphone, TF slot, and 32 MB PSRAM for advanced IoT and AI applications. Its compact size and rich features make it ideal for smart cameras, interactive displays, and robotics. DFRobot DFR1172

Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano-M

ESP32-S3-Touch-LCD-1.9 is an advanced development board with a 1.9" touch screen, based on the ESP32-S3R8 microcontroller, offering a rich set of communication and sensor features. Intended for HMI projects, motion monitoring, and interactive applications, it is well-suited for solutions requiring a compact display and precise touch control. Thanks to compatibility with Raspberry Pi Pico and support for ESP-IDF and Arduino IDE, it enables rapid development of advanced IoT systems.

An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.

ESP32-S3-Touch-LCD-3.5B-C is a complete development system with an IPS display, camera, and wireless connectivity, designed for interactive applications involving voice, image, and touch. Intended for advanced IoT projects, smart terminals, control panels, and offline AI applications.

ESP32-S3-Touch-LCD-2-C is a versatile development module with an IPS touch screen and OV5640 camera, designed for projects involving image processing, video analysis, and gesture control. With wireless communication, motion sensors, and extensive expansion capabilities, it is well-suited for IoT devices, mobile interactive systems, and compact user terminals.

Integrated board with ESP32-P4 and ESP32-C6-MINI and a 7-inch IPS touch screen with a resolution of 1024 × 600 intended for advanced IoT, AIoT, HMI and multimedia processing applications. Thanks to Wi-Fi 6 support, many industrial interfaces and strong security functions, it constitutes a versatile solution for next-generation embedded systems.