ESP32-S3-Zero board with Wi-Fi ESP32-S3, without connectors - Waveshare 25081

ESP32-S3-Touch-AMOLED-1.91 enables the development of advanced user interfaces and IoT applications with touch support. Thanks to the AMOLED display, motion sensor, PSRAM memory, and wireless connectivity, it performs well in mobile HMI panels, interactive systems, and smart devices. The connector-free design allows for easy integration in custom-mounted projects.

Board with the WiFi Espressif ESP32-S3 module. It offers 8 MB of Flash memory and 512 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5426

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071

ESP32-S3-Touch-LCD-1.47 is a compact development board with an IPS display and ESP32-S3 microcontroller, equipped with Wi-Fi and Bluetooth as well as Flash and PSRAM memory. The version without pre-soldered pin headers allows flexible integration into IoT and HMI projects, ensuring smooth handling of graphical interfaces and wireless communication.

Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5399

A standard device for communication with the ESP32 device under test (DUT) during production testing. Espressif ESP-BAT32

The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4

ESP32-S3-Touch-LCD-1.47-M is a compact development board with an ESP32-S3 and a 1.47" IPS touchscreen display, combining high computing performance with a ready set of interfaces and connectors. With factory-soldered pin headers, it is ideal for rapid prototyping of IoT, AIoT, and HMI interface applications.

ESP32-P4-WIFI6-Touch-LCD-4B is a control panel with a 4″ IPS display, Wi-Fi 6 and Bluetooth 5 support, 5-point touch, and advanced audio capabilities, designed for smart installations, HMI, and IoT devices. The module supports the development of interactive user interfaces in modern automation systems.

Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769

Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405

ESP32-C3-LCD-0.71-B is a compact, energy-efficient module with an IPS display and wireless connectivity, featuring a protective enclosure and lens. Ideal for portable projects such as watches, graphic interface sensors, simulation systems, or touch-controlled devices. With support for LVGL and flexible expansion options, it is suitable for a wide range of embedded applications.

The ESP32-S2-SOLO-N4 is a 2.4 GHz Wi-Fi module based on the ESP32-S2 chip with 4 MB of flash memory, offering a data transmission speed of up to 150 Mbps and an output power of 19.5 dBm. It is equipped with interfaces such as ADC, GPIO, I2C, I2S, SPI, PWM, UART, and USB, making it a versatile solution for IoT applications, wearable electronics, and smart home devices.

ESP32 module board equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with a metal housing. Waveshare ESP32-S3-LCD-1.28-B

Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325