![Main view Main view](https://kamami.pl/82071-large_default/esp32-c3-mini-development-board-based-on-esp32-c3fn4-single-core-processor-160mhz-running-frequenc.jpg)
![Main view Main view](https://kamami.pl/82071-large_default/esp32-c3-mini-development-board-based-on-esp32-c3fn4-single-core-processor-160mhz-running-frequenc.jpg)
zł19.24 tax excl.
Espressif ESP32-C3 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Espressif ESP32-C3 WiFi module board with RISC-V core. It has 4 MB Flash memory, 400 KB SRAM memory and an integrated 2.4 GHz WiFi and BLE transceiver. The board has a WS2812 RGB diode and a 3.3 V stabilizer with a current capacity of up to 500 mA. On 15 GPIO pins, the user has analog inputs, PWM, I2C, UART, SPI and I2S interface at their disposal. The integrated chip antenna ensures good quality of WiFi and BLE communication with a satisfactory range.
1. USB typu C connector | 5. 3,3 V LDO |
2. BOOT button | 6. ESP32-C3FN4 |
3. RESET button | 7. Ceramic antenna |
4. LED RGB WS2812 |
The module offers great potential in the field of IoT systems and can be used both to control LEDs and to transmit data to a specific platform. It can also be programmed using Arduino IDE, ESP-IDF or MicroPython. Full documentation is available on the product page.
Cable with USB type A and USB type C plugs, length 1m, white
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5405
No product available!
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
No product available!
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Equipped with a STEMMA QT connector. Adafruit 5401
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER
No product available!
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
Espressif ESP32-C3 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M