zł48.70 tax excl.
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
The ESP32-H2-DevKitM-1 is a development board based on the Bluetooth® Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. This module is specially designed for all kinds of low-power IoT applications. It uses a 32-bit, single-core RISC-V processor operating at up to 96 MHz. It has 320 KB of SRAM, 128 KB of ROM, 4 KB of LP memory and 4 MB of built-in Flash memory.

The board has most of the I/O pins of the ESP32-H2-MINI-1 module, which are available on the connectors on both sides of the board, which facilitates connection and prototyping. The power supply circuit is based on a 3.3 V LDO stabilizer, and the operating status of the device is indicated by an LED. The user has at his disposal Boot and Reset buttons and an RGB LED. Communication with a computer is possible thanks to the built-in USB-UART CP2102N converter. There are two USB type C ports on the board. One allows transfer speeds up to 12 Mb/s and is connected directly to the ESP32. The second one allows you to power the board and to communicate via the USB-UART converter. The module will be used in IoT projects, industrial automation or smart homes.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB type A and USB type C plugs, length 1m, white
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
No product available!
A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM
No product available!
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
No product available!
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8
A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484
The ESP32-S3-BOX-3 is a development kit based on the ESP32-S3 SoC, ideal for creating AIoT, Edge AI, and IIoT applications. The ESP32-S3-WROOM-1 module supports WiFi 802.11 b/g/n (2.4 GHz) and Bluetooth 5.0, features 36 configurable GPIO pins, and includes a PCB antenna. It operates within a temperature range of -40 to +85°C with a supply voltage of 3.0 - 3.6V. The kit supports software solutions like ESP-BOX, ESP-SR, ESP-RainMaker, and ESP-Matter, facilitating the development of advanced IoT systems. ESP32-S3-BOX-3
Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano-M
Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with soldered connectors. Waveshare ESP32-H2-DEV-KIT-N4-M
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4
No product available!
The ESP32-C6 is a versatile microcontroller with support for WiFi 6 and Bluetooth 5, designed for a wide range of applications in smart homes, industry, and consumer electronics. With support for multiple interfaces and development environments, this board offers the flexibility and performance needed to execute advanced projects. Compatibility with Raspberry Pi Pico HAT extensions further enhances its capabilities, making it an ideal choice for developers and engineers. Waveshare 26845
The ESP32-C6 is a versatile microcontroller with support for WiFi 6 and Bluetooth 5, designed for a wide range of applications in smart homes, industry, and consumer electronics. With support for multiple interfaces and development environments, this board offers the flexibility and performance needed to execute advanced projects. Compatibility with Raspberry Pi Pico HAT extensions further enhances its capabilities, making it an ideal choice for developers and engineers. Waveshare 26866
The ESP32-S3 A7670E 4G development board combines the ESP32-S3R2 microcontroller with the A7670E module, offering global LTE Cat-1, 2G, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-A7670E-4G-EN
No product available!
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4