Thing Plus - WiFi/Bluetooth module with ESP32 WROOM (U.FL)
ID: 582781
zł154.62
Tax included
zł125.71 tax excl.
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
Description
Module with WiFi and Bluetooth Espressif ESP32 WROOM with ESP32-D0WDQ6 core. ESP32 Thing plus integrates a rich set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. Thanks to the built-in ESP32 WROOM module, SparkFun Thing Plus has 16MB of flash memory, 520kB of internal SRAM memory, integrated 802.11 BGN WiFi transceiver and dual Bluetooth mode and a JST-PH 2.0 connector for connecting a LiPo battery. ESP32 WROOM is equipped with a U.FL connector for connecting an external antenna.
The module offers a lot of possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. Thing Plus can also be programmed using the Arduino IDE and a special library. A user guide with sample programs is available on the manufacturer's website.
Features
- Processor and memory
- Dual-core 32-bit Xtensa® LX6 microprocessor, up to 600 DMIPS
- Clock frequency: up to 240 MHz
- 520 KB of SRAM
- 16 MB Flash memory
- Peripheral interfaces
- 12-bit SAR ADC 13 channels
- Converters 2 × 8-bit DAC
- 8 x Touch sensors
- Temperature sensor
- 3 × SPI
- 2 × I2S
- 2 × I2C
- 3 × UART
- SD / SDIO / MMC memory controller
- CAN 2.0
- 16 x PWM
- Hall sensor
- Connectors:
- GPIO - 21 pin
- MicroUSB connector
- 2.0mm JST-PH connector
- Qwiic connector
- U.FL
- AES, SHA2, ECC, RSA-4096 encryption
- Power supply 2.3 to 3.6 V
- Dimensions: 58.42 x 22.86 mm
582781
Data sheet
- Microcontroller
- ESP32
- Flash memory
- 16 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- No
- Length
- 58,4 mm
- Width
- 22,8 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
USB cable (type A) - microUSB (type B) used to connect the computer with devices equipped with microUSB-B sockets. Length: 1m
zł6.20
24h
Available quantity: 26
Available
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
zł16.91
24h
Available quantity: 1
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
zł118.28
24h
Available quantity: 1
Available
Other products in the same category (16)
The board is equipped with the STM32F405 microcontroller with the ARM Cortex-M4 core and SPI Flash memory, 20 GPIO pins, SD card slot, pins for connecting the battery with the charging and voltage stabilization circuit, JTAG connector and Qwiic socket. SparkFun DEV-17712
zł149.38
24h
Available quantity: 2
Available
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
zł68.83
24h
Available quantity: 3
Available
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Development board with Renesas RA6M5 microcontroller, running at 200 MHz with built-in Flash memory and easy sensor connection thanks to Feather form factor and Qwiic connector. Equipped with Bluetooth Low Energy connectivity and SmartBond technology - CodeLess AT command Datapump, the board allows easy configuration without the need for reprogramming, making it suitable for both beginners and advanced users. SparkFun WRL-24243
zł283.28
24h
Available quantity: 1
Available
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
zł249.49
24h
Available quantity: 1
Available
Evaluation kit with SiFive Freedom E310 RISC-V (ISA) microcontroller. It has 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 for USB and JTAG, and a Qwiic and USB Type-C connector. SparkFun DEV-15799
zł199.00
3 weeks
No product available!
A Thing Plus development board that combines the Matter protocol and the Qwiic SparkFun ecosystem to facilitate the prototyping of IoT devices. It uses the MGM240P module from Silicon Labs, which provides secure connectivity for both 802.15.4 with Mesh (Thread) and Bluetooth® Low Energy 5.3 protocols. SparkFun DEV-20270
zł134.76
24h
Available quantity: 4
Available
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15454
zł281.13
24h
Available quantity: 1
Available
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48
3 weeks
No product available!
Development board based on the u-blox NORA-W306 module, offering dual-band WiFi and Bluetooth Low Energy. Equipped with a microcontroller with two Arm Cortex-M33 and Cortex-M23 cores, ideal for battery-powered IoT projects. It offers USB Type-C, microSD, JST for LiPo batteries, and 20 GPIO pins, supports a variety of communication interfaces, and allows easy integration with the Qwiic system and programming via Arduino IDE. SparkFun WRL-21637
zł209.86
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42
24h
Available quantity: 3
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574
zł123.89
24h
Available quantity: 1
Available
Advanced IoT platform, equipped with ESP32 WROOM-S3 MINI module, supporting WiFi and Bluetooth, with 4MB Flash and 2MB PSRAM, and a microSD card slot. It offers 21 GPIO pins, support for UART, I2C and SPI interfaces, built-in USB Type-C connector and the ability to charge LiPo batteries, making it a versatile tool for developing projects. SparkFun WRL-24408
zł139.85
24h
Available quantity: 1
Available
Board with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-19696
zł180.15
24h
Available quantity: 2
Available
A development board that combines the u-blox NINA-B306 Bluetooth module, the ISM330DHCX 6DoF IMU sensor, and the BME280 atmospheric pressure sensor. It has a built-in Qwiic connector and LiPo battery connector as well as a charger and LiPo parameters monitor. SparkFun WRL-20854
zł499.00
3 weeks
No product available!
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381