Thing Plus ESP32 WROOM - WiFi/Bluetooth module with ESP32 WROOM (USB type C)
ID: 1181686
5906623418275
zł175.00
Tax included
zł142.28 tax excl.
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
Description
Module with WiFi and Bluetooth Espressif ESP32 WROOM with ESP32-D0WDQ6. ESP32 Thing plus integrates a rich set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. Thing Plus has 16 MB Flash memory, 520 KB internal SRAM memory, integrated 802.11 BGN WiFi transceiver and dual Bluetooth mode and a JST-PH 2.0 connector for connecting a LiPo battery. The module offers great possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. Thing Plus can also be programmed using the Arduino IDE.
Features
- Processor and memory
- Dual-core 32-bit Xtensa® LX6 microprocessor, up to 600 DMIPS
- Clock frequency: up to 240 MHz
- 520 KB of SRAM
- 16 MB Flash memory
- Peripheral interfaces
- 12-bit SAR ADC 13 channels
- Converters 2 × 8-bit DAC
- 8 x Touch sensors
- Temperature sensor
- 3 × SPI
- 2 × I2S
- 2 × I2C
- 3 × UART
- SD / SDIO / MMC memory controller
- CAN 2.0
- 16 x PWM
- Hall sensor
- Connectors:
- GPIO - 21 pin
- USB type C connector
- 2.0mm JST-PH connector
- Qwiic connector
- AES, SHA2, ECC, RSA-4096 encryption
- Power supply 2.3 to 3.6 V
- Dimensions: 58.42 x 22.86 mm
1181686
Data sheet
- Microcontroller
- ESP32
- Flash memory
- 16 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- Yes
- Length
- 58,4 mm
- Width
- 22,8 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Qwiic connector overlay provides an easy-to-install way to add Qwiic connectors to Thing Plus and Feather boards. Communication takes place via the I2C interface. Sparkfun DEV-16790
zł26.64
24h
Available quantity: 2
Available
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42
24h
Available quantity: 3
Available
Development kit with nRF9160 microcontroller with ARM Cortex M33 core. Equipped with 1MB Flash and 256KB RAM, it can support CAT M1 LTE and NB-IoT cellular communication. SparkFun WRL-17354
zł1,013.38
Delivery date unknown
No product available!
Other products in the same category (16)
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
zł118.28
24h
Available quantity: 1
Available
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
zł249.49
24h
Available quantity: 1
Available
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15454
zł281.13
24h
Available quantity: 1
Available
Evaluation kit with SiFive Freedom E310 RISC-V (ISA) microcontroller. It has 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 for USB and JTAG, and a Qwiic and USB Type-C connector. SparkFun DEV-15799
zł199.00
3 weeks
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
zł154.62
3 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42
24h
Available quantity: 3
Available
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48
3 weeks
No product available!
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Development kit with nRF9160 microcontroller with ARM Cortex M33 core. Equipped with 1MB Flash and 256KB RAM, it can support CAT M1 LTE and NB-IoT cellular communication. SparkFun WRL-17354
zł1,013.38
3 weeks
No product available!
The board is equipped with the STM32F405 microcontroller with the ARM Cortex-M4 core and SPI Flash memory, 20 GPIO pins, SD card slot, pins for connecting the battery with the charging and voltage stabilization circuit, JTAG connector and Qwiic socket. SparkFun DEV-17712
zł149.38
24h
Available quantity: 2
Available
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
zł68.83
24h
Available quantity: 3
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
zł175.00
3 weeks
No product available!
Board with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-19696
zł180.15
24h
Available quantity: 2
Available
Development board in Feather format equipped with AW-CU488. The module has an integrated WiFi wireless communication controller, LiPo charging circuit and Qwiic connector. SparkFun DEV-19957
zł432.32
3 weeks
No product available!
A development board that combines the u-blox NINA-B306 Bluetooth module, the ISM330DHCX 6DoF IMU sensor, and the BME280 atmospheric pressure sensor. It has a built-in Qwiic connector and LiPo battery connector as well as a charger and LiPo parameters monitor. SparkFun WRL-20854
zł499.00
3 weeks
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168