Widok główny
search
  • Widok główny
  • Widok z góry
  • Widok z dołu
ID: 1181691
zł432.32
Tax included

zł351.48 tax excl.

Development board in Feather format equipped with AW-CU488. The module has an integrated WiFi wireless communication controller, LiPo charging circuit and Qwiic connector. SparkFun DEV-19957

3 weeks
On request
Kamami is the official distributor of Sparkfun modules and development kits. All products of this brand in our offer are original and come directly from the manufacturer.

Description

Development board in Feather format equipped with AW-CU488. The module has an integrated low power WiFi wireless communication controller (2.4 GHz and 5 GHz) Realtek RTL8721DM. It consists of a dual-core processor: Real-M300 CPU (ARMv8-M, Cortex-M33) and Real-M200 (ARMv8-M, Cortex-M23) and allows Thing Plus to connect to the cloud.

The board is equipped with a USB type C connector for programming and power supply, as well as two reset and start buttons. The user has a 2-pin JST connector and a MCP73831 single-cell LiPo charging system (set to default with 500 mA). The voltage is regulated with the XC6222 3.3V / 700mA voltage stabilizer. There are three LEDs for power status, charging and status. Due to the module size, the board is slightly longer than the standard Thing Plus base, making several GPIO pins in total (30 interrupts, seven analog, 11 PWM, two UART, two SPI and one I2C) available. The board also includes a built-in audio codec with two-channel analog inputs and outputs with different sampling rates. There are five jumpers on the back of the board for LiPo charging speed, LED, boot mode, and USB shielding. Additional sensors can be connected by the user via the Qwiic connector and the I2C interface.

Features

  • AzureWave AW-CU488 Module
    • up to 200MHz operating frequency
    • 512KB SRAM and 4MB PSRAM
    • 32Mbit SPI Flash
    • Realtek RTL8721DM Dual Processor Core
      • Real-M300 CPU (Armv8-M, Cortex-M33)
      • Real-M200 CPU (Armv8-M, Cortex-M23)
    • 2.4GHz/5GHz WiFi 802.11a/b/g/n 1T1R WLAN
    • Built-in Antenna w/ Internal Shielding Antenna
    • 2-Channel Audio CODEC (8/12/16/24/32/48/.../176.4 KHz)
  • Thing Plus (or Feather) Form-Factor
    • Breadboard-compatible 0.1" (2.54 mm) pitch headers
    • Dimensions: 3.05" x 0.90" (77.47 mm x 22.86 mm)
    • 30x Available GPIO
      • Up to 30x INT
      • Up to 7x 12-bit ADC
      • Up to 11x PWM
      • Up to 2x UARTs
      • Up to 2x SPI
      • Up to 1x I2C
    • Two Mounting Holes
      • 4-40 screw compatible
    • 38x PTH Pins
    • 1x USB Type C Connector
    • 1x 2-pin JST Connector for a LiPo Battery (not included)
    • 1x 4-pin Qwiic Connector
  • CP210X USB-to-Serial Converter
  • MCP73831 Single Cell, LiPo Charge IC
    • Charge Rate Set to 500mA (default)
  • Buttons
    • Boot
    • Reset
  • LEDs
    • Power
    • Charge
    • Status
  • Jumpers
    • Power LED
    • LiPo Charge Rate (500mA/100mA)
    • Auto Reset Circuit
    • USB Shielding
1181691

Data sheet

Microcontroller
RTL8721DM
Flash memory
32 Mb
Number of I/O
30
Ethernet
none
WiFi/BT module
Yes
Bluetooth module
No
Logic voltage
3,3 V/5 V
MicroSD slot
No
Wi-Fi chip
AW-CU488
Wi-Fi standard
IEEE 802.11 a/b/g/n
Frequency range
2,4 GHz/5 GHz
Baud rate
Inny
Antenna connector
uFL
Power supply voltage
nie dotyczy
Length
77,4 mm
Width
22,8 mm
USB connector type
USB type C

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)