New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
SparkFun Thing Plus Artemis - evaluation kit with the Artemis module
ID: 578343
5906623420223
zł123.89
Tax included
zł100.72 tax excl.
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574
Description
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C connector for powering and programming the set. The board also has a USB-UART converter, a microphone connected to the PDM interface of the microcontroller and a JTAG debugging connector.
Artemis has support in the Arduino IDE, which greatly facilitates the start of work with the module. The module's instruction manual and documentation are available on the manufacturer's website.
Features
- Feather Footprint
- 1M Flash / 384k RAM
- 48MHz / 96MHz turbo available
- 6uA/MHz (operates less than 5mW at full operation)
- 21 GPIO - all interrupt capable
- 21 PWM channels
- Built in BLE radio
- 8 ADC channels with 14-bit precision with up to 2.67 million samples per second effective continuous, multi-slot sampling rate
- 2 UARTs
- 2 I2C buses
- 1 SPI buses
- PDM interface
- I2S Interface
- USB-UART CH340C converter
- USB Type C connector
- JTAG debug connector
- Built-in microphone and RTC clock
- Qwiic Connector
578343
Data sheet
- Microcontroller
- Artemis
- Core
- Cortex-M4
- Frequency
- 48MHz
- Flash memory
- 1024kB
- RAM
- 384 kB
- EEPROM memory
- none
- Number of digital pins
- 21
- Number of PWM channels
- 21
- Ilość wejść analogowych
- 10
- ADC
- 1x 14-bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- Yes
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 5 V
- Supply voltages max
- 5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
No product available!
USB / USB type C cable with a long 0.8m long connector. Kruger & Matz KM0363
zł28.54
24h
Available quantity: 1
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444
zł146.44
24h
Available quantity: 2
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
zł102.51
24h
Available quantity: 2
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.99
Delivery date unknown
No product available!
BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
zł62.12
24h
Available quantity: 1
Available
Cable with USB typ A and USB typ C connectors, compatible with Quick Charge 3.0, cable length 1,8m. LANBERG
zł11.06
24h
Available quantity: 7
Available
Other products in the same category (16)
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.99
3 weeks
No product available!
A development board compatible with the Arduino Pro Mini. It is equipped with an ATSAMD21G18 microcontroller. It has 22 I/O lines and 14 analogue inputs. SparkFun DEV-13664
zł119.00
3 weeks
No product available!
Available
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56
24h
Available quantity: 1
Available
Available
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
zł204.39
24h
Available quantity: 1
Available
Pro Micro is similar to Pro Mini Arduino compatible board, main difference is that Pro Micro uses ATmega32u4 with builtin USB connectivity. Sparkfun DEV-12640
zł108.55
3 weeks
No product available!
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
3 weeks
No product available!
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444
zł146.44
24h
Available quantity: 2
Available
Base board compatible with Arduino. It was equipped with an Atmega 328P microcontroller. It has 14 I/O lines (including 6 PWM channels) and 6 analog inputs. SparkFun DEV-14525
zł128.77
24h
Available quantity: 1
Available
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. Himax HM01B0 camera included. SparkFun KIT-17071
zł281.13
24h
Available quantity: 1
Available
Qduino Mini is a tiny, Arduino-compatible board with ATmega32u4 (8MHz, 32kB Flash, 2kB RAM), a LiPol battery connector and charger built-in. SparkFun DEV-13614
zł179.57
24h
Available quantity: 1
Available
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
zł102.51
24h
Available quantity: 2
Available
SparkFun MicroView is a board with an ATmega328P microcontroller from the AVR family and an OLED 64 x 48 pixel display. DEV-12923
zł237.80
3 weeks
No product available!
SparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
zł122.23
3 weeks
No product available!
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574