SAMD21 Dev - development board with ATSAMD21G18 microcontroller
ID: 584168
5906623420681
zł164.38
Tax included
zł133.64 tax excl.
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
Description
Development kit with ATSAMD21G18 microcontroller with ARM Cortex M0+ core, compatible with Arduino. The system has a built-in 256 KB of Flash memory and 32 KB of SRAM memory, 30 I/O lines, 14 analog inputs and 6 SERCOM interfaces that can be used as UART, I2C or SPI. The plate is equipped with RTC quartz and a 3.3 V stabilizer with a capacity of 600 mA. The set is powered and programmed via the microUSB port. The module is also equipped with a connector and a LiPo battery charging system and space for a DC power connector.
The board can be programmed using the Arduino IDE using libraries for Arduino Zero. On the product page there is a guide with examples of use.
Features
- ATSAMD21G18 32-bit, 48 MHz ARM Cortex-M0 +
- 256 kB flash memory
- 32 KB of SRAM
- 32 KB EEPROM memory (Flash emulated)
- 30 GPIO
- 14 ADC channels in 12-bit resolution
- Analog-to-digital and digital-to-analog converters (ADC and DAC)
- Vin power supply: 3.5 to 6 volts
- VBATT Power: 3.7V Lipo
- Stabilizer 3.3 V 600 mA
- Arduino Uno Rev3 pin layout
- Integrated USB controller
584168
Data sheet
- Microcontroller
- ATSAMD21E18
- Core
- Cortex-M0+
- Frequency
- 48MHz
- Flash memory
- 256kB
- RAM
- 32kB
- EEPROM memory
- none
- Number of digital pins
- 30
- Number of PWM channels
- 10
- Ilość wejść analogowych
- 14
- ADC
- 1x 12bit
- DAC
- 1x 12bit
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 3,5 V
- Supply voltages max
- 6 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 2429
Available
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
Delivery date unknown
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 24
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
Delivery date unknown
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.49
Delivery date unknown
No product available!
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
24h
Available quantity: 204
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
Delivery date unknown
No product available!
Other products in the same category (16)
SparkFun DEV-10914 is a compact development board with an ATmega328 and 3.3 V logic level, equipped with basic protection and designed to work with an external USB–UART interface. It is suitable for applications requiring cooperation with low-voltage modules.
zł93.90
3 weeks
No product available!
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574
zł123.89
24h
Available quantity: 1
Available
Board with the ATmega328 microcontroller from the AVR family, there are 20 I/O lines, 6 PWM channels, 6 analog inputs at the user\'s disposal. SparkFun DEV-15123
zł110.63
24h
Available quantity: 1
Available
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
zł189.00
24h
Available quantity: 32
Available
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
3 weeks
No product available!
No product available!
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł160.43
24h
Available quantity: 1
Available
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
zł153.80
24h
Available quantity: 1
Available
SparkFun MicroView is a board with an ATmega328P microcontroller from the AVR family and an OLED 64 x 48 pixel display. DEV-12923
zł237.80
3 weeks
No product available!
Base board compatible with Arduino. It was equipped with an ATmega328P microcontroller. It has 22 I / O lines (including 6 PWM channels) and 8 analog inputs and a Qwiic connector. SparkFun DEV-18158
zł125.78
24h
Available quantity: 1
Available
A development board compatible with the Arduino Pro Mini. It is equipped with an ATSAMD21G18 microcontroller. It has 22 I/O lines and 14 analogue inputs. SparkFun DEV-13664
zł119.00
3 weeks
No product available!
Available
Qduino Mini is a tiny, Arduino-compatible board with ATmega32u4 (8MHz, 32kB Flash, 2kB RAM), a LiPol battery connector and charger built-in. SparkFun DEV-13614
zł179.57
24h
Available quantity: 1
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
zł111.57
24h
Available quantity: 2
Available
Base board compatible with Arduino. It was equipped with an Atmega 328P microcontroller. It has 14 I/O lines (including 6 PWM channels) and 6 analog inputs. SparkFun DEV-14525
zł128.77
24h
Available quantity: 1
Available
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672