New products
New products
Available
Available
Available
Available
Available
Available
SparkFun RedBoard Artemis - evaluation kit with the Artemis module
ID: 578341
5906623420209
zł146.44
Tax included
zł119.06 tax excl.
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444
Description
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C connector for powering and programming the set. The board also has a USB-UART converter, a microphone connected to the PDM interface of the microcontroller and a JTAG debugging connector.
Artemis has support in the Arduino IDE, which greatly facilitates the start of work with the module. The module's instruction manual and documentation are available on the manufacturer's website.
Features
- Arduino UNO Footprint
- USB-UART CH340C converter
- USB Type C connector
- JTAG debug connector
- Built-in microphone and RTC clock
- 1M Flash / 384k RAM
- 48MHz / 96MHz turbo available
- 6uA/MHz (operates less than 5mW at full operation)
- 24 GPIO - all interrupt capable
- 21 PWM channels
- Built in BLE radio
- 10 ADC channels with 14-bit precision with up to 2.67 million samples per second effective continuous, multi-slot sampling rate
- 2 UARTs
- 6 I2C buses
- 4 SPI buses
- PDM interface
- I2S Interface
- Secure 'Smart Card' interface
- Qwiic Connector
578341
Data sheet
- Microcontroller
- Artemis
- Core
- Cortex-M4
- Frequency
- 48MHz
- Flash memory
- 1024kB
- RAM
- 384 kB
- EEPROM memory
- none
- Number of digital pins
- 24
- Number of PWM channels
- 21
- Ilość wejść analogowych
- 10
- ADC
- 1x 14-bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- Yes
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 7
- Supply voltages max
- 15 V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
USB A 2.0 / USB C cable silicone, 1 m, white
Delivery date unknown No product available!
- Available
- Available
USB / USB type C cable with a long 0.8m long connector. Kruger & Matz KM0363
zł28.54 24hAvailable quantity: 1 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444
zł146.44 24hAvailable quantity: 2 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
zł102.51 24hAvailable quantity: 4 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.99 24hAvailable quantity: 1 AvailableBLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
zł62.12 24hAvailable quantity: 2 Available
Other products in the same category (16)
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
zł195.93 4 weeks No product available!
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.99 24hAvailable quantity: 1 Available No product available!
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
zł153.80 24hAvailable quantity: 1 AvailableThe Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. Not only is it small and LiPo-ready, it’s a very capable XBee-ready development board. DEV-11520
zł212.57 24hAvailable quantity: 1 AvailableThis board combines the simplicity of the UNO’s Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3. SparkFun DEV-13975
zł95.23 24hAvailable quantity: 1 AvailablePro Micro is similar to Pro Mini Arduino compatible board, main difference is that Pro Micro uses ATmega32u4 with builtin USB connectivity. Sparkfun DEV-12640
zł108.55 3 weeks No product available!
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
zł164.81 24hAvailable quantity: 1 AvailableQduino Mini is a tiny, Arduino-compatible board with ATmega32u4 (8MHz, 32kB Flash, 2kB RAM), a LiPol battery connector and charger built-in. SparkFun DEV-13614
zł179.57 24hAvailable quantity: 1 AvailableA development board compatible with the Arduino Pro Mini. It is equipped with an ATSAMD21G18 microcontroller. It has 22 I/O lines and 14 analogue inputs. SparkFun DEV-13664
zł119.00 3 weeks No product available!
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
zł204.39 24hAvailable quantity: 1 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
zł102.51 24hAvailable quantity: 4 AvailableSparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
zł122.23 3 weeks No product available!
Pro Micro is similar to Pro Mini Arduino compatible board, main difference is that Pro Micro uses ATmega32u4 with builtin USB connectivity. Sparkfun DEV – 12587
zł132.18 3 weeks No product available!
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05 24hAvailable quantity: 1 AvailableBoard with the ATmega328 microcontroller from the AVR family, there are 20 I/O lines, 6 PWM channels, 6 analog inputs at the user\'s disposal. SparkFun DEV-15123
zł113.89 24hAvailable quantity: 1 Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444