New products
New products
zł609.00
Delivery date unknown
zł462.10
24h
Available
ESP32-S3-Pico - ESP32-S3 WiFi/BLE module board (without connectors)
ID: 1184846
5906623423606
zł41.03
Tax included
zł33.36 tax excl.
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Espressif ESP32-S3 WiFi module board features 16 MB Flash memory, 2 MB PSRAM and an integrated WiFi 802.11 b/g/n transceiver and Bluetooth supporting BLE 5 and Bluetooth Mesh. A 3.3 V inverter with up to 2 A current capability and a 2.4 GHz ceramic antenna are included on the board. The 27 GPIO pins provide the user with analogue inputs and I2C, UART, SPI and DVP interfaces. The pinout and raster is compatible with HAT modules dedicated to the Raspberry Pi Pico, allowing the user to take advantage of the wide range of extension modules available. The board uses a USB type C connector for programming.
| 1. ESP32-S3R2 | 6. HUB controller CH334F |
| 2. Antenna 2,4 GHz | 7. USB-UART converter CH343P |
| 3. Flash W25Q128JVSIQ | 8. MP28164 DC-DC Converter |
| 4. BOOT button | 9. USB type C converter |
| 5. RESET button | 10. LED indicator |
The board offers great potential in the field of IoT systems. It can also be programmed using the Arduino IDE, ESP-IDF or CircuitPython. Full documentation is available on the product page.
Features
- Xtensa 32-bit LX7 240 MHz dual-core processor
- Integrated 512 kB SRAM, 384 kB ROM, 16 MB Flash, 2 MB PSRAM
- Wi-Fi 2.4 GHz - 802.11b/g/n
- Bluetooth LE 5, Bluetooth Mesh
- Ceramic antenna
- MP28164 3.3 V 2 A DC-DC converter
- Optimised power supply for low power consumption
- Power supply: USB Type C
- Built-in USB OTG Full-Speed interface, LCD interface (8-bit RGB/8080/6800 serial), DVP camera interface (8-bit - 16-bit)
- 27 GPIO pins, including ADC, UART, SPI, I2C, PWM
- Pin spacing compatible with Raspberry Pi Pico HAT modules
- Dimensions: 51 x 21 mm
1184846
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.10
24h
Available quantity: 42
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 25
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.77
24h
Available quantity: 18
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł50.43
24h
Available quantity: 6
Available
Other products in the same category (16)
ESP32 module board equipped with a 1.28-inch round display with touch panel. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with metal housing. Waveshare ESP32-S3-Touch-LCD-1.28-B
zł124.51
24h
Available quantity: 4
Available
Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 512 kB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Version with soldered connectors. Waveshare ESP32-C6-Zero-M
zł27.48
24h
Available quantity: 8
Available
Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series
zł9.36
24h
Available quantity: 12
Available
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
zł181.02
24h
Available quantity: 11
Available
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96
zł59.72
24h
Available quantity: 13
Available
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
zł16.91
24h
Available quantity: 5
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M
zł36.32
4 weeks
No product available!
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł47.60
24h
Available quantity: 5
Available
ESP-PROG is an advanced tool for programming and debugging Espressif microcontrollers such as ESP32, ESP32-C3, ESP32-S2, ESP32-S3 and ESP8266. With the built-in FT2232HL USB bridge, ESP-PROG converts the USB 2.0 interface to serial and parallel interfaces, offering functions of automatic firmware download, serial communication and online debugging via JTAG
zł76.00
24h
Available quantity: 5
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
zł35.57
24h
Available quantity: 18
Available
The ESP32-S3-DevKitC-1-N8R2 is an advanced development board with the ESP32-S3-WROOM-1/1U module, offering versatile wireless connectivity with support for 2.4 GHz WiFi and Bluetooth LE 5.0. With high computational power, ample memory, and a wide range of interfaces, this board is perfect for a variety of applications, including IoT, automation, and smart agriculture. Espressif Systems ESP32-S3-DevKitC-1-N8R2
zł119.00
24h
Available quantity: 3
Available
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482
zł24.00
24h
Available quantity: 2
Available
Development board with WiFi and Bluetooth module Espressif ESP32-WROVER. It is equipped with a microSD card slot, a USB-UART converter and a Li-Ion battery charging system. TTGO T8 V1.1 ESP32
zł90.26
24h
Available quantity: 2
Available
Development board with ESP32 module (WiFi + Bluetooth) in the set with the OV2640 camera. Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One Kit
zł88.82
24h
Available quantity: 1
Available
A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484
zł52.79
24h
Available quantity: 1
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico