.png)
ESP32-DEVKITC-32D V4 IoT development board with Wi-Fi module ESP-WROOM-32D
ID: 573333
5906623456529
zł33.31
Tax included
zł27.08 tax excl.
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
Description
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. The converter has a USB / UART converter (Silabs CP2102), and the majority of the GPIO line of the WROOM module has been led to the holes with a pitch of 2.54mm.
properties
- Built-in ESP32-WROOM-32D module
- Xtensa LX6 processor with two cores up to 240 MHz
- 448 kB ROM
- 520 kB of SRAM memory
- It allows you to operate digital buses, including: I2C, SPI, I2S, PWM, UART, IR, and CAN
- 12-bit SAR analogue digital converter (up to 18 channels)
- Two 8-bit digital-to-analogue converters
- BT protocols: Bluetooth v4.2 BR / EDR and Bluetooth BLE
- Bluetooth Audio support: CVSD and SBC
- Wi-Fi protocols: 802.11 b / g / n / d / e / i / k / r (802.11no bit rates up to 150 Mbit / s)
- Wi-Fi work modes: sta / softAP / SoftAP + sta / P2P
- Wi-Fi security: WPA / WPA2 / WPA2-Enterprise / WPS
- Wi-Fi encryption: AES / RSA / ECC / SHA
- Network protocols: IPv4, IPv6, SSL, TCP / UDP / HTTP / FTP / MQTT
- Built-in PCB antenna (MIFA)
- Built-in USB-UART converter
- GPIO pins with a pitch of 2.54 mm
- USB power supply (microUSB type socket)
- Module dimensions: 54.5 x 27.9 mm
573333
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
zł16.90
24h
Available quantity: 91
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł105.37
24h
Available quantity: 1
Available
Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575
zł57.17
24h
Available quantity: 3
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB PSRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł91.24
24h
Available quantity: 87
Available
Other products in the same category (16)
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł37.04
24h
Available quantity: 59
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł53.20
24h
Available quantity: 6
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł51.25
24h
Available quantity: 18
Available
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł215.68
24h
Available quantity: 3
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł46.36
24h
Available quantity: 3
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł40.91
24h
Available quantity: 6
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł138.68
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł229.22
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł266.01
4 weeks
No product available!
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB PSRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł91.24
24h
Available quantity: 87
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł70.34
24h
Available quantity: 2
Available
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł266.00
24h
Available quantity: 1
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł355.80
24h
Available quantity: 1
Available
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4