ESP32-S3-Nano-M dev board with ESP32-S3 Wi-Fi/BLE and soldered connectors - Waveshare 26752

M5Stack series development kit equipped with ESP32-PICO-D4. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K051-B

KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components

ESP32-S3-ETH is a versatile development board for projects requiring simultaneous support for Ethernet, Wi-Fi, and Bluetooth. With support for cameras, TF cards, and peripheral interfaces, it is well-suited for implementing solutions in image transmission, remote control, smart monitoring systems, and integration with Raspberry Pi Pico HATs. The option to add a PoE module further enhances power and communication flexibility in industrial and IoT applications.

ESP32-S3-Touch-LCD-3.5B-C is a complete development system with an IPS display, camera, and wireless connectivity, designed for interactive applications involving voice, image, and touch. Intended for advanced IoT projects, smart terminals, control panels, and offline AI applications.

ESP32-WROOM-32U-N16 is an IoT communication module with a dual-core processor, 16 MB Flash and support for WiFi and Bluetooth BLE. Thanks to the U.FL connector for an external antenna, it provides flexibility in projects requiring stable wireless communication. Ideal for IoT systems, automation and network applications.

ESP32-S3-Touch-LCD-4 is a versatile development board featuring a 4-inch touchscreen and the ESP32-S3 microcontroller, offering high processing power, wireless communication support, and a wide range of interfaces. The touch panel, LVGL-based GUI, multiple connectors, and support for various power sources make it an excellent solution for interactive and control applications in embedded systems and automation.

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071

Evaluation board with the ESP32-S2-SOLO-N4R2 module enables the development of applications using 2.4 GHz Wi-Fi and extensive peripheral interfaces. Equipped with 4 MB Flash and 2 MB PSRAM, as well as an integrated PCB antenna, it provides a solid foundation for building IoT projects, automation systems, monitoring solutions, and smart devices. With rich functionality and a large number of GPIO pins, it supports the implementation of even advanced embedded systems.

A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3

ESP32-S3-Touch-AMOLED-1.43 is a development module with a high-resolution 1.43" round AMOLED display, integrated with the ESP32-S3 microcontroller and a range of peripheral interfaces. It is perfectly suited for HMI interface projects, IoT applications, and solutions requiring motion detection or wireless communication. Extensive expansion capabilities and support for ESP-IDF and Arduino IDE make it a versatile tool for electronics and embedded systems designers.

Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3

ESP32-S3-DualEye-LCD-1.28 is a versatile AIoT board with two IPS displays, audio, Wi-Fi/Bluetooth and rich expansion options. Designed for HMI projects, voice control, wearable devices and smart embedded systems, with the ability to expand and adapt to advanced applications.

Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with soldered connectors. Waveshare ESP32-H2-DEV-KIT-N4-M

M5Stack AtomS3R-AI Chatbot is a compact and efficient kit for developing voice assistants and projects in the field of AIoT and speech recognition. Thanks to the ESP32-S3, support for various development platforms and a ready-to-use audio base, it is ideal for smart devices, voice interfaces and next-generation IoT applications.

Development board with WiFi and Bluetooth module Espressif ESP32-WROVER. It is equipped with a microSD card slot, a USB-UART converter and a Li-Ion battery charging system. TTGO T8 V1.1 ESP32