ESP32-C6-MINI-1 dev board Wi-Fi 6 160 MHz with pre-soldered pins - Waveshare 26845

Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with soldered connectors. Waveshare ESP32-H2-DEV-KIT-N4-M

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M

Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8

Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4

The ESP32-S2-SOLO-N4 is a 2.4 GHz Wi-Fi module based on the ESP32-S2 chip with 4 MB of flash memory, offering a data transmission speed of up to 150 Mbps and an output power of 19.5 dBm. It is equipped with interfaces such as ADC, GPIO, I2C, I2S, SPI, PWM, UART, and USB, making it a versatile solution for IoT applications, wearable electronics, and smart home devices.

Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2

ESP32-C6-LCD-1.47 integrates a graphic display, TF card slot, and wireless communication (Wi-Fi 6/BLE) in a compact form. The module serves as a functional platform for IoT projects, HMI applications, mobile controllers, and interactive devices. With broad software support and compatibility with popular tools, it facilitates prototyping and integration with other systems.

Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M

ESP32 module board equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with a metal housing. Waveshare ESP32-S3-LCD-1.28-B

A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28

ESP32-S3-POE-ETH enables the development of advanced projects with remote power supply and data transfer capabilities. This solution is especially useful in industrial installations, IP monitoring, control systems, and applications based on ESP32 and the Raspberry Pi ecosystem.

A compact development board based on the ESP32-WROOM-32, offering 2.4 GHz Wi-Fi, Bluetooth, and a dual-core 240 MHz processor with 4 MB FLASH and 4 MB RAM. It is compatible with the WeMos Mini family of boards and supports popular shields, making it a universal solution for IoT projects. With a built-in USB–UART converter and support for the Arduino IDE, it provides easy programming and integration. ESP32 D1 mini

Evaluation board with the ESP32-S2-SOLO-N4R2 module enables the development of applications using 2.4 GHz Wi-Fi and extensive peripheral interfaces. Equipped with 4 MB Flash and 2 MB PSRAM, as well as an integrated PCB antenna, it provides a solid foundation for building IoT projects, automation systems, monitoring solutions, and smart devices. With rich functionality and a large number of GPIO pins, it supports the implementation of even advanced embedded systems.

ESP32-S3-LCD-1.3-B is a compact development module with a 1.3" color IPS screen, Wi-Fi and Bluetooth communication, motion sensors, and a plastic enclosure, designed for graphic projects, interactive mobile applications, wearable electronics prototypes, and data acquisition systems. With SPI support and hardware display rotation, it enables flexible implementation in projects requiring color graphics display.