ESP32-S3-Touch-LCD-3.5B development board with 3.5-inch 320×480 IPS touch display, QSPI, Wi‑Fi and Bluetooth 5 - Waveshare 31337
ID: 1198461
5902186322509
zł173.37
Tax included
zł140.95 tax excl.
ESP32-S3-Touch-LCD-3.5B is a development board with a touchscreen display and wireless connectivity, designed for IoT projects, voice control, and user interfaces. Integrated features such as IMU, RTC, microSD card, and audio enable the development of advanced interactive devices.
Description
The ESP32-S3-Touch-LCD-3.5B development board, equipped with the ESP32-S3R8 microcontroller and a 3.5" IPS display with 320×480 resolution, enables the creation of projects with a touchscreen user interface. The display communicates via QSPI, while the touch panel uses I2C. The ESP32-S3R8 features 2 Xtensa LX7 cores (240 MHz), 512 KB SRAM, 8 MB PSRAM, and 16 MB Flash memory.
The module supports 2.4 GHz Wi-Fi and Bluetooth 5 LE/Mesh. Onboard components include a 6-axis IMU (accelerometer and gyroscope), RTC with battery backup, an audio codec with microphone and speaker connector, a microSD card slot, USB Type-C port, BOOT, PWR and RESET buttons, and GPIO headers. The AXP2101 handles power supply, 3.7 V battery charging, and power management. With ESP-IDF and Arduino IDE support, the board is well-suited for developing projects with touch interfaces and offline voice features.
Properties
- Microcontroller: ESP32-S3R8, Xtensa 32-bit LX7, dual-core, 240 MHz
- Memory: 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, 16 MB NOR-Flash
- Display: 3.5" IPS, 320×480 px, 262K colors, capacitive touch
- LCD controller: AXS15231B (QSPI), touch controller (I2C)
- IMU: QMI8658 6-axis (3-axis accelerometer, 3-axis gyroscope)
- RTC: PCF85063 with backup battery support (SH1.0 connector)
- Audio: ES8311 codec, built-in microphone, MX1.25 speaker connector
- microSD card slot
- Connectivity: Wi-Fi 2.4 GHz (802.11 b/g/n), Bluetooth 5 LE/Mesh
- Interfaces: USB Type-C, GPIO, UART, I2C
- Power: AXP2101, supports 3.7 V Li-Ion batteries (MX1.25)
- Buttons: BOOT, PWR, RESET
- Software support: ESP-IDF, Arduino IDE
- Dimensions: 92.44 × 61.00 × 11.50 mm
Included in the set
- ESP32-S3-Touch-LCD-3.5B board ×1
- Speaker 6Ω 1W ×1
1198461
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł250.02
24h
Available quantity: 1
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł355.80
24h
Available quantity: 1
Available
Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124
zł44.90
24h
Available quantity: 5
Available
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
zł123.06
24h
Available quantity: 1
Available
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
zł89.91
1 weeks
No product available!
Development board with ESP32-S3-WROOM-1U module, featuring Wi-Fi 2.4 GHz, Bluetooth LE, 8 MB Flash, 8 MB PSRAM and an IPEX connector for an external antenna. Espressif ESP32-S3-DevKitC-1U-N8R8
zł77.90
24h
Available quantity: 11
Available
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero
zł24.07
24h
Available quantity: 49
Available
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
zł18.14
24h
Available quantity: 26
Available
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero-M
zł25.60
24h
Available quantity: 2
Available
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M
zł21.54
4 weeks
No product available!
Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925
zł109.41
24h
Available quantity: 1
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
zł35.03
4 weeks
No product available!
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M
zł36.81
24h
Available quantity: 9
Available
A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28
zł95.58
24h
Available quantity: 1
Available
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
zł166.98
24h
Available quantity: 11
Available
Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM
zł17.74
4 weeks
No product available!
ESP32-S3-Touch-LCD-3.5B is a development board with a touchscreen display and wireless connectivity, designed for IoT projects, voice control, and user interfaces. Integrated features such as IMU, RTC, microSD card, and audio enable the development of advanced interactive devices.