ESP32-S3 development board with 4″ display 480×480 - Waveshare 30871
ID: 1197743
5902186322134
zł125.52
Tax included
zł102.05 tax excl.
ESP32-S3-LCD-4 is an advanced development board with a 4" display, intended for high-level HMI, automation, and interactive system applications. The non-touch version offers a full set of industrial interfaces (RS485, CAN, I2C), integrated power management, and flexible mounting options. With high computational performance, ample memory resources, and support for ESP-IDF and Arduino IDE environments, it serves as a solid platform for implementing control and communication systems in end devices.
Description
Development board based on the ESP32-S3N16R8 microcontroller with a dual-core Xtensa LX7 processor (up to 240 MHz), integrated 2.4 GHz Wi-Fi module (802.11 b/g/n) and Bluetooth 5 (LE). Equipped with a 4" LCD display with a resolution of 480×480 pixels, based on an IPS panel with a 160° viewing angle. This version does not support touch input. Built-in memory includes 16 MB Flash and 8 MB PSRAM. The board features a full set of interfaces: RS485, CAN, I2C, TF card slot, and USB Type-C port.
Thanks to GUI support (e.g. LVGL), various wiring methods (bottom and rear screw terminals), power management, and expandable GPIO, the board is ideal for applications such as industrial control panels, IoT gateways, automation controllers, HMI systems, and smart interaction panels.
Features
- ESP32-S3N16R8 microcontroller, dual-core LX7, up to 240 MHz
- Memory: 16 MB Flash, 8 MB PSRAM, 512 KB SRAM, 384 KB ROM
- 4" IPS LCD display, 480×480 px, 65K colors, 160° viewing angle
- No touch support (non-touch version)
- Supports 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE), ceramic antenna
- Interfaces: CAN (TJA1051T), RS485 (SP3485), I2C, TF, USB Type-C
- Power ports: PH2.0 (3.7 V battery), 10P screw terminal (7–36 V DC)
- Supports two wiring methods: bottom and rear enclosure terminals
- RTC chip PCF85063 with backup battery support
- Power management: SW6106, XL1509-ADJE1
- IO expansion: TCA9554PWR
- Extras: BOOT, RESET, and PWRKEY buttons, buzzer, LED indicators
Included
- ESP32-S3-LCD-4 x1
- 3.5 mm 10P screw terminal (bottom wiring) x1
- 3.5 mm 10P screw terminal (rear wiring) x1
1197743
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
This IoT audio development kit is based on the ESP32-A1S module with a dual-core Xtensa LX6 processor. It enables high-quality audio playback with 3.5mm audio outputs and 4Ω/3W speaker connectors. It supports Wi-Fi, Bluetooth 4.2, microSD cards up to 64GB, and the ESP-ADF framework with Google Assistant and Amazon Alexa integration.
zł109.38
2 weeks
No product available!
This development kit features the ESP32-C3-MINI-1 module and a 1.28-inch 240x240 color LCD display with a GC9A01 controller. It allows you to create interactive projects using a rotary encoder, built-in speaker, and infrared transmitter and receiver. The kit supports the LVGL library for building graphical user interfaces and wireless Wi-Fi and Bluetooth connectivity.
zł109.37
24h
Available quantity: 2
Available
Crowtail – ESP8266 NodeMCU 2.0 is a universal WiFi module for IoT projects with a ready Crowtail interface, microUSB port, and Li-Po battery charging function. It works well in mobile and stationary applications based on Arduino IDE or NodeMCU Lua.
zł45.15
24h
Available quantity: 4
Available
This compact development board features Wi-Fi 6, Bluetooth 5 LE, and 802.15.4, ideal for Zigbee and Matter-based IoT projects. It offers numerous GPIOs, onboard LiPo charging, and battery monitoring thanks to the MAX17048 chip. It includes a NeoPixel LED and a STEMMA QT port for quick sensor connection. Its energy-efficient design, with a deep sleep mode of approximately 17µA, is ideal for battery-powered applications. Adafruit 5933
zł76.06
24h
Available quantity: 3
Available
A compact development board with a built-in 1.14" IPS display, ideal for user interfaces, IoT projects, and case-mounted devices. Featuring the ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB, it offers 4MB of Flash and 2MB of PSRAM to support more advanced graphics and networking applications. Three user buttons, a STEMMA QT connector, and an integrated LiPo charger provide convenient prototyping and expansion capabilities. Adafruit 6303
zł125.41
24h
Available quantity: 3
Available
ESP32-based development kit with a 2" IPS display, 16MB Flash memory, Li-Po battery, integrated speaker, and exposed IO interfaces. M5Stack K001-V27
zł210.33
24h
Available quantity: 1
Available
Core board from Waveshare based on a dual-chip ESP32-P4 and ESP32-C6 design, supporting 2.4GHz Wi-Fi and Bluetooth 5.3, equipped with 32MB Flash and 32MB PSRAM. Waveshare 32604
zł54.60
6 weeks
No product available!
Development board based on the ESP32-C6 microcontroller, featuring a 1.83 inch IPS touch display with 240 x 284 resolution, WiFi 6 and Bluetooth 5 connectivity, onboard audio codec, microphones, and speaker, designed for IoT projects and wearable applications. Waveshare ESP32-C6-Touch-LCD-1.83-EN
zł93.50
6 weeks
No product available!
Development board based on the ESP32-C6 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi 6 and Bluetooth 5 interfaces, onboard audio codec, microphones, speaker, and a 3.7 V lithium battery, designed for IoT projects and wearable applications. Waveshare ESP32-C6-Touch-LCD-1.83
zł98.22
6 weeks
No product available!
ESP32 development board with a 3.5inch capacitive IPS touch display 320x480, onboard audio codec, microphone and speaker, supporting Wi-Fi and BLE. ESP32-Touch-LCD-3.5-EN Waveshare 32871
zł122.73
6 weeks
No product available!
ESP32 development board with a 3.5inch capacitive IPS touch display 320x480, onboard audio codec, microphone and speaker, supporting Wi-Fi and BLE, supplied with a lithium battery. ESP32-Touch-LCD-3.5 Waveshare 32870
zł130.66
6 weeks
No product available!
Development board based on the ESP32-C5 with a 240 MHz RISC-V processor supports dual-band Wi-Fi 6 (2.4 GHz and 5 GHz), Bluetooth LE, Zigbee, and Thread. The version with pre-soldered pin headers and 16 MB Flash plus 8 MB PSRAM is intended for IoT applications and multi-protocol gateways. Waveshare ESP32-C5-WIFI6-KIT-N16R8-M
zł50.06
6 weeks
No product available!
Development board based on the ESP32-C5 microcontroller with a 240MHz RISC-V processor, supporting dual-band Wi-Fi 6 (2.4GHz and 5GHz), Bluetooth LE, Zigbee, and Thread, equipped with 16MB Flash and 8MB PSRAM, designed for IoT applications and multi-protocol gateways. Waveshare ESP32-C5-WIFI6-KIT-N16R8
zł47.66
24h
Available quantity: 8
Available
The ESP32-P4-WIFI6-POE-ETH-D is an advanced Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for HMI applications, edge computing, multimedia processing, and industrial systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE power supply, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-D
zł373.90
6 weeks
No product available!
ESP32-P4-WIFI6-POE-ETH-C is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-C
zł166.85
24h
Available quantity: 3
Available
ESP32-P4-WIFI6-POE-ETH is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, industrial automation, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of I/O and multimedia interfaces. ESP32-P4-WIFI6-POE-ETH
zł113.32
6 weeks
No product available!
ESP32-S3-LCD-4 is an advanced development board with a 4" display, intended for high-level HMI, automation, and interactive system applications. The non-touch version offers a full set of industrial interfaces (RS485, CAN, I2C), integrated power management, and flexible mounting options. With high computational performance, ample memory resources, and support for ESP-IDF and Arduino IDE environments, it serves as a solid platform for implementing control and communication systems in end devices.