Development board with 3.49" touchscreen and ESP32-S3R8 with type A case and battery - Waveshare 32373
ID: 1201193
5902186330481
zł147.02
Tax included
zł119.53 tax excl.
Description
High-performance development board based on the ESP32-S3R8 chip with a dual-core Xtensa LX7 processor up to 240 MHz, integrated with a 3.49-inch IPS capacitive touchscreen with a resolution of 172 × 640 pixels. It supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), uses an onboard antenna and offers extensive communication options.
The board includes 8 MB PSRAM, 16 MB Flash, RTC PCF85063, a 6-axis QMI8658 IMU, dual microphones and ES8311/ES7210 audio codecs with noise and echo reduction. A microSD card slot allows storage expansion, and an IPEX1 connector is provided for an external antenna.
The device comes housed in a Case A enclosure with a built-in 18650 lithium battery. The enclosure features power, BOOT and backlight control buttons. On the back are a USB Type-C connector, MX1.25 charging port, speaker connector and a 22-pin expansion header (2.54 mm).
Support for ESP-IDF and Arduino IDE, along with online and offline voice interaction capabilities, allows for creating advanced IoT and HMI systems.
Specifications
- ESP32-S3R8: dual-core Xtensa LX7 processor, 240 MHz
- Memory: 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, 16 MB Flash
- Display: 3.49" IPS, 172 × 640, 16.7M colors, capacitive touch
- Controller: AXS15231B (QSPI – LCD, I2C – touch)
- Connectivity: Wi-Fi 2.4 GHz (802.11 b/g/n), Bluetooth 5 (LE)
- Audio: ES8311 (DAC), ES7210 (ADC), dual mic
- Sensors: QMI8658 (3-axis accelerometer + 3-axis gyro)
- RTC: PCF85063 with time backup
- microSD (TF) card slot, FAT32 support
- Power: built-in 18650 lithium battery (charging via MX1.25 port)
- Interfaces: USB Type-C, IPEX1 (antenna), audio out, 22-pin expansion header (2.54 mm)
- ESP-IDF and Arduino IDE support
- Voice recognition and interaction (offline/online)
- Dimensions: 98.50 × 28.99 × 31.80 mm
Package includes
- ESP32-S3-Touch-LCD-3.49 (Case A) ×1
- 18650 lithium battery ×1
1201193
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł50.45
4 weeks
No product available!
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł201.25
24h
Available quantity: 4
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł43.60
4 weeks
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł37.65
24h
Available quantity: 27
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.68
24h
Available quantity: 3
Available
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł227.59
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł266.01
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł64.98
24h
Available quantity: 113
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 1
Available
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
Regular pricezł128.68zł105.31
24h
Available quantity: 2
Available
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł264.47
24h
Available quantity: 2
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł355.80
24h
Available quantity: 1
Available