.png)
ESP32-S3 development board with 7″ display 800×480 - Waveshare 30406
ID: 1197689
5902186322042
zł149.13
Tax included
zł121.24 tax excl.
The ESP32-S3-LCD-7 development board from Waveshare, equipped with a 7" screen with a resolution of 800×480, is designed for creating graphical user interfaces in applications based on the ESP32-S3 microcontroller. Thanks to the presence of PSRAM, large Flash memory, support for popular communication interfaces, and battery power supply, the board is suitable for HMI projects, information terminals, device controllers, and IoT systems requiring graphics support without touch functionality.
Description
The ESP32-S3-LCD-7 development board integrates the ESP32-S3 microcontroller with a 7-inch color LCD display with a resolution of 800×480 px. The module, equipped with a dual-core Xtensa LX7 processor clocked up to 240 MHz, supports wireless connectivity via Wi-Fi 802.11 b/g/n and Bluetooth 5 LE with a built-in antenna. Onboard are 512 KB SRAM, 384 KB ROM, 8 MB PSRAM, and 16 MB Flash memory. The device supports power supply from a 3.7 V lithium battery and offers a range of communication interfaces: CAN, RS485, I2C, USB, UART, and a microSD card slot. With support for graphics libraries (e.g., LVGL), the board is suitable for HMI interface projects and embedded systems requiring data visualization. This version does not include a touch panel.
Features
- Xtensa 32-bit LX7 dual-core processor, up to 240 MHz
- Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE
- Built-in antenna
- 512 KB SRAM, 384 KB ROM
- Built-in 8 MB PSRAM and 16 MB Flash
- 7" LCD display, 800×480 resolution, 65K colors
- Interfaces: CAN, RS485, I2C, UART, USB, microSD
- Supports 3.7 V lithium battery power supply (PH2.0 connector)
- LED indicators: power, charging, battery fully charged
- Interface selection switches for UART and termination resistors
- Low-power mode support
Included in the set
- ESP32-S3-LCD-7 x1
- HY2.0 2P to 2PIN male cable 10 cm ×2
- HY2.0 3P to 3PIN male cable 10 cm ×1
- HY2.0 4P to 4PIN male cable 10 cm ×2
- Mounting screw set ×1
1197689
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes
zł66.53
24h
Available quantity: 1
Available
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
zł231.13
24h
Available quantity: 1
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
zł175.13
24h
Available quantity: 1
Available
Versatile communication module based on the ESP32 microcontroller, designed for industrial automation and as an IoT gateway for PLCs. It supports fieldbus standards such as CAN and RS485, as well as wireless technologies Wi-Fi, BLE and 4G LTE, which enables integration with industrial networks and the cloud. Thanks to its rugged design and support for programming in ESP-IDF, the EdgeBox-ESP-100 is suitable for remote control and monitoring in harsh industrial environments. Seeed Studio 102991735
zł741.22
24h
Available quantity: 1
Available
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
zł259.00
24h
Available quantity: 2
Available
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
zł129.49
24h
Available quantity: 1
Available
Multi-protocol module, SMD module ESP32-S3R8 with built-in 8 MB Octal PSRAM, 16 MB Quad SPI flash, and IPEX antenna connector.
zł29.90
1 weeks
No product available!
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł37.04
24h
Available quantity: 58
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł53.20
24h
Available quantity: 6
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł51.25
24h
Available quantity: 18
Available
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł215.68
24h
Available quantity: 3
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł46.36
24h
Available quantity: 3
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł40.91
24h
Available quantity: 6
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł138.68
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł229.22
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
The ESP32-S3-LCD-7 development board from Waveshare, equipped with a 7" screen with a resolution of 800×480, is designed for creating graphical user interfaces in applications based on the ESP32-S3 microcontroller. Thanks to the presence of PSRAM, large Flash memory, support for popular communication interfaces, and battery power supply, the board is suitable for HMI projects, information terminals, device controllers, and IoT systems requiring graphics support without touch functionality.