zł10,639.61
.png)
New products
New products New products
ESP32-C6 Development Board with 1.69" IPS Touch LCD 240x280px Wi-Fi 6 / BLE 5 - Waveshare 31538
ID: 1203967
5902186338241
zł101.77
Tax included
zł82.74 tax excl.
Development board based on the ESP32-C6 microcontroller featuring a 1.69" IPS color display with a resolution of 240x280 px and a capacitive touch panel. The display is driven by the ST7789V2 controller, while touch input is handled by the CST816T chip. The module supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee / Thread) and includes sensors, an audio codec and a Li-Po battery charging circuit. Waveshare ESP32-C6-Touch-LCD-1.69
Description
ESP32-C6 Touch LCD 1.69" is a compact development board designed for IoT projects, portable devices and systems requiring a graphical user interface. The module is based on the ESP32-C6 microcontroller featuring a 32-bit RISC-V processor clocked up to 160 MHz and 16 MB of Flash memory, providing high performance while maintaining low power consumption.
The board includes a 1.69" IPS color display with a resolution of 240 × 280 px supporting 262K colors. The display uses the ST7789V2 driver communicating via the SPI interface, while the capacitive touch panel is handled by the CST816T controller using the I2C interface. This configuration allows the creation of interactive user interfaces in embedded devices.
The module supports wireless communication through Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee / Thread) and is equipped with a QMI8658 6-axis IMU sensor, PCF85063 RTC chip, ES8311 audio codec with microphone and amplifier, a USB-C connector for programming, and a 3.7 V Li-Po battery connector. This makes the board suitable for smart IoT devices, voice-interaction systems and AIoT applications.
- ESP32-C6 – microcontroller with a 32-bit RISC-V processor supporting Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee / Thread).
- W25Q128JVSIQ – 16 MB NOR Flash memory used for storing program code and data.
- PCF85063 – RTC (Real Time Clock) chip used for timekeeping functions.
- QMI8658 – 6-axis IMU sensor including a 3-axis accelerometer and a 3-axis gyroscope for motion and orientation detection.
- ETA6098 – high-efficiency lithium battery charging IC responsible for managing battery charging.
- MX1.25 2P Lithium battery header – MX1.25 connector for a 3.7 V Li-Po battery supporting charging and discharging.
- Type-C port – USB-C interface of the ESP32-C6 used for programming and serial communication (logs/debug).
- MX1.25 speaker header – connector for connecting an external speaker.
- Onboard antenna – integrated antenna for Wi-Fi and Bluetooth wireless communication.
- PWR button – power button for controlling battery power supply (single-press, double-press, multi-press or long-press operations).
- BOOT button – programming mode button used when uploading firmware to the microcontroller.
- RST button – reset button used to restart the device.
- Microphone – onboard microphone used for audio capture and voice interaction.
- NS4150B – 3 W mono Class-D audio power amplifier used to drive a speaker.
- ES8311 (back side) – low-power mono audio codec responsible for audio signal processing.
Features
- Microcontroller
- Microcontroller: ESP32-C6
- Processor: 32-bit RISC-V up to 160 MHz + low-power RISC-V 20 MHz
- Flash memory: 16 MB NOR Flash
- ROM: 320 KB
- SRAM: 512 KB HP SRAM + 16 KB LP SRAM
- Display
- Display type: IPS LCD with touch panel
- Display size: 1.69"
- Resolution: 240 × 280 px
- Color depth: 262K colors
- Display driver: ST7789V2
- Display interface: SPI
- Touch panel
- Type: capacitive
- Touch controller: CST816T
- Touch interface: I2C
- Image parameters
- Brightness: 435 cd/m²
- Contrast ratio: 315:1
- Wireless connectivity
- Wi-Fi 6
- Bluetooth 5 LE / BLE
- IEEE 802.15.4 (Zigbee 3.0 / Thread)
- Sensors
- QMI8658 – 6-axis IMU (accelerometer + gyroscope)
- Additional chips
- PCF85063 RTC
- ES8311 audio codec
- NS4150B audio amplifier
- Power supply
- 3.7 V Li-Po battery connector (MX1.25)
- USB-C port
- Interfaces
- SPI
- I2C
- UART
- USB
- GPIO
Kit includes
- ESP32-C6-Touch-LCD-1.69 module
- 6 Ω / 1 W speaker
1203967
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Development module equipped with two ESP32-S3 microcontrollers, designed for developing USB HID devices that communicate with computers, USB mice, and keyboards. The board features three USB ports, multiple communication and debugging interfaces, and supports the ESP-IDF development framework. MAKCU ESP32-S3
zł103.69
4 weeks
No product available!
Matter, Thread and Zigbee gateway based on the ESP32-S3 controller and ESP32-H2 module, designed for integrating IoT devices operating in the IEEE 802.15.4 standard. The device features a 2" IPS touch display, camera, motion sensors, USB OTG interface and two HY2.0-4P expansion connectors. Designed for DIN rail mounting, the platform supports Matter, Thread and Zigbee protocols, making it suitable for smart home systems, building automation and sensor network applications. M5Stack K149
zł269.01
24h
Available quantity: 1
Available
Development kit with the ESP32-PICO-V3-ZERO module featuring 2.4 GHz WiFi and Bluetooth LE for designing IoT devices and wireless applications. The board offers Arduino Zero pin compatibility, a built-in USB-to-UART bridge, a PCB antenna, and support for the Amazon Alexa Connect Kit (ACK) platform. Espressif Systems ESP32-PICO-V3-ZERO-DEVKIT
zł399.00
24h
Available quantity: 1
Available
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. EN variant. Waveshare ESP32-C6-Touch-LCD-1.54-EN
zł84.24
6 weeks
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54
zł92.21
6 weeks
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN
zł68.19
6 weeks
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54
zł74.27
6 weeks
No product available!
Development board based on the ESP32-C3FH4 with a 1.47-inch 172 × 320px LCD, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Version with factory pre-soldered black pin headers, also featuring a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47-M
zł48.18
6 weeks
No product available!
Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47
zł46.11
6 weeks
No product available!
ESP32-S3R8 development board with a 1.85-inch 360 × 360px LCD capacitive touch display and a CNC-machined aluminum alloy enclosure. Features 2.4GHz Wi-Fi, Bluetooth 5 LE, 8MB PSRAM, 16MB Flash, QMI8658 6-axis IMU, dual microphones, audio circuitry with an output for connecting a speaker and a USB-C interface. Waveshare ESP32-S3-Touch-LCD-1.85B-EN
zł178.08
6 weeks
No product available!
Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152
zł285.02
24h
Available quantity: 47
Available
ESP32-S3-based development platform featuring a 1.75" round AMOLED display, audio subsystem, IMU sensor, WiFi connectivity, and a rechargeable battery for portable IoT devices. M5Stack C152
zł249.95
1 weeks
No product available!
ESP32-S3-based development platform featuring a 4-inch full-color E Ink Spectra 6 display, audio subsystem, temperature and humidity sensor, microSD card slot, and rechargeable battery for low-power IoT devices and data display applications. M5Stack C151
zł405.01
1 weeks
No product available!
Portable development device based on the ESP32-S3 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 2.8" IPS color display, a full QWERTY keyboard, and a trackball controller in a compact enclosure. Factory-installed LILYGO Factory Firmware allows immediate use without manually flashing the base firmware. The package includes an 868 MHz LoRa FPC antenna, a power cable, and a 1×6 pin header. The device is designed for LoRa communication terminals, portable messaging devices, IoT projects, and custom applications based on the ESP32-S3 microcontroller. LILYGO TTGO T-Deck 868 MHz Black LILYGO Factory Firmware
zł276.76
24h
Available quantity: 10
Available
LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz - ESP32 development board with LoRa, OLED and...
A development board based on the ESP32 microcontroller that combines an SX1278 LoRa transceiver, a 0.96" OLED display, and a microSD card slot in a single compact design. Preloaded with Disaster-Radio firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a 433 MHz LoRa antenna, a JST 2-pin power cable, and pin headers for soldering. The board is designed for autonomous communication devices, mesh network nodes, and IoT applications. LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz
zł95.26
Delivery date unknown
No product available!
An ESP32-based development board that combines a LoRa communication module, NEO-6M GPS receiver, and a 0.96" OLED display in a single device. Preloaded with Meshtastic firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a non-soldered 0.96" OLED display, a 433 MHz LoRa antenna, and pin headers for self-assembly. The board is suitable for building autonomous mesh network nodes, GPS trackers, and battery-powered IoT devices using a 18650 Li-Ion cell or a microUSB power supply. LILYGO TTGO T-Beam Meshtastic 433 MHz Non-Soldered OLED
zł185.00
24h
Available quantity: 8
Available
Development board based on the ESP32-C6 microcontroller featuring a 1.69" IPS color display with a resolution of 240x280 px and a capacitive touch panel. The display is driven by the ST7789V2 controller, while touch input is handled by the CST816T chip. The module supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee / Thread) and includes sensors, an audio codec and a Li-Po battery charging circuit. Waveshare ESP32-C6-Touch-LCD-1.69