.png)
ESP32-C6-DEV-KIT-N8-M board with ESP32-C6 and soldered connectors - Waveshare 25563
ID: 1188311
5906623428076
zł38.49
Tax included
zł31.29 tax excl.
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M
Description
ESP32-C6-DEV-KIT-N8 is an advanced development board based on a microcontroller with a RISC-V core. This compact module combines many advantages, including support for WiFi 6, Bluetooth 5 and IEEE 802.15.4, which includes protocols such as Zigbee 3.0 and Thread. Designed for smart home, industrial automation and consumer electronics applications.
The ESP32-C6-WROOM-1-N8 module is the heart of this device and is equipped with a single-core RISC-V processor clocked at up to 160 MHz and 8 MB Flash memory. It has a wide set of interfaces including SPI, UART, I2C, I2S, LED PWM, SDIO. Two USB HUB chips CH343 and CH334 allow you to develop projects using simultaneous communication via both USB and UART, which makes this board extremely versatile. Additionally, compatibility with the ESP32-C6-DevKitC-1-N8 system facilitates the expansion of projects with various peripheral modules.
ESP32-C6-DEV-KIT-N8 comes with examples and tutorials available online in the ESP-IDF development environment, making the process of getting started with the device easier and faster. Thanks to this, users can quickly and efficiently use its potential in practice.
Features
- ESP32-C6-WROOM-1-N8 module
- 32-bit single-core RISC-V processor, up to 160 MHz
- 320 kB ROM, 512 kB HP SRAM and 16 kB LP SRAM
- 8 MB Flash memory
- Communication Wi-Fi 6 2.4 GHz, Bluetooth 5 LE, Zigbee and Thread (802.15.4)
- PCB antenna
- Compatible with Matter
- USB Type-C connector
- Built-in USB-UART CH343 converter
- Communication interfaces: SPI, UART, I2C, I2S, LED PWM, SDIO
- 3.3V voltage stabilizer
- Built-in USB Hub (supports USB and UART simultaneously via USB-C port)
- Boot and Reset button
- RGB LED
- Dimensions: 55 x 25.36 mm
1188311
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Cable with USB type A and USB type C plugs, length 2m, white
zł7.02
24h
Available quantity: 18
Available
The USB-C 2.0 Natec Prati cable, 2 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2147
zł20.38
24h
Available quantity: 3
Available
The USB-C 2.0 Natec Prati cable, 1 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2146
zł17.33
24h
Available quantity: 3
Available
Other products in the same category (16)
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł105.37
24h
Available quantity: 1
Available
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
zł49.41
24h
Available quantity: 6
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
zł152.38
4 weeks
No product available!
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
zł157.76
24h
Available quantity: 1
Available
A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED
zł36.09
24h
Available quantity: 6
Available
Expansion module with a DAC/ADC converter and a camera dedicated to FireBeetle ESP32. It allows you to create versatile IoT applications. DFRobot DFR0498
zł111.20
24h
Available quantity: 4
Available
Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377
zł201.38
24h
Available quantity: 3
Available
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
zł32.90
1 weeks
No product available!
Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575
zł57.17
24h
Available quantity: 3
Available
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
zł33.31
24h
Available quantity: 167
Available
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł49.18
24h
Available quantity: 1
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
zł245.39
4 weeks
No product available!
IoT development board equipped with ESP32 chip with WiFi and Bluetooth, has a USB-UART interface allowing programming via the USB port of the computer. DFRobot DFR0625
zł90.21
24h
Available quantity: 2
Available
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Regular pricezł90.49zł70.74
24h
Available quantity: 1
Available
A device with modifiable functionality that works under the control of the NodeMCU ESP32 system. It combines two wireless technologies: Bluetooth 4.1 and WiFi. iNode MCU USB
Regular pricezł134.38zł93.48
24h
Available quantity: 2
Available
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
zł29.90
24h
Available quantity: 37
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M