ESP32-C3-Zero-Basic-Kit - starter kit with ESP32-C3 microcontroller - Waveshare 33358

ESP32-S3 1.64” AMOLED Touch Display Development Board is a robust development platform for IoT, HMI, and smart device projects. Equipped with a high-contrast AMOLED display with a wide viewing angle, a rich set of peripherals, an accelerometer and gyroscope, as well as Wi-Fi and Bluetooth, it enables rapid development of modern interactive applications and portable devices.

ESP32-P4-WIFI6-Touch-LCD-4C board with a 4″ round AMOLED display, 10-point touch support, Wi-Fi 6, Bluetooth 5, and hardware security features, designed for advanced embedded applications, HMI systems, voice-enabled devices, and smart interfaces.

ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.

UNIHIKER K10 is a comprehensive AI educational board featuring an ESP32-S3, wireless connectivity, and a set of built-in sensors, designed for learning visual programming and exploring AI. It enables rapid development of projects involving computer vision, voice control, and IoT communication – ideal for educational use and prototyping.

ESP32-S3R8 microcontroller development board featuring a 3.16-inch 320x820 color LCD display with an ST7701 controller. It offers 2.4GHz Wi-Fi and Bluetooth 5 connectivity, 16MB of Flash, and 8MB of PSRAM for high performance and support for rich graphics interfaces (LVGL). Onboard features include a QMI8658 motion sensor (6-axis IMU), a PCF85063 RTC, a microSD slot, UART/I2C/USB connectors, a 3.7V battery connector with charging, and a USB Type-C port. Waveshare ESP32-S3-LCD-3.16

FireBeetle 2 ESP32-P4 kit with IO board is a powerful platform for developing AI devices and vision systems, integrating video encoding, touch, Wi-Fi 6, and Bluetooth 5. It is ideal for building intelligent HMI panels, face recognition cameras, and computer vision-based solutions.

ESP32-S3-Touch-AMOLED-2.06 is a complete development platform for designing wearable devices with an AMOLED display, touch control, audio, wireless connectivity, and AI features. Thanks to its compact design and built-in battery, it is suitable as a foundation for smartwatches, data loggers, and IoT devices.

This 32-bit RISC-V development board, running at up to 160 MHz, is designed for AIoT and human-computer interface applications. Featuring a 1.43-inch, 466x466-pixel AMOLED display and an FT6146 touch controller, it delivers detailed graphics and interactive experiences. The board features Wi-Fi 6, Bluetooth 5, and Zigbee/Thread connectivity, dual digital microphones, audio playback and recording, and the ability to connect a lithium battery or power via USB-C. ESP32-C6-Touch-AMOLED-1.43

ESP32-P4-Module is a module featuring two chips: ESP32-P4 and ESP32-C6, offering support for 2.4 GHz Wi-Fi in the 802.11 b/g/n/ax standard and Bluetooth 5.3. With large memory, image and voice processing capabilities, and built-in security features, it is suitable for IoT applications, HMI, image and voice recognition systems, and smart industry.

This development board combines Wi-Fi, Bluetooth, and LoRa technologies, ideal for IoT projects requiring long-range communication. Equipped with a dual-core 240 MHz processor and an 868 MHz SX1262 modem, it provides a transmission range of up to several kilometers with low power consumption. It features a built-in 0.96-inch OLED display, a CP2102 USB-to-UART converter, and a lithium battery charging circuit for mobile operation. Heltec Lora32-V3

An intelligent AI development kit based on the ESP32-S3-WROOM-1-N16R16VA chip, designed for building advanced voice and multimedia interaction systems. The device supports 2.4 GHz Wi-Fi, Bluetooth 5 (LE), and offers integration with AI frameworks such as OpenAI and Gemini, enabling full-duplex voice communication. It features a 1.85-inch 360x360 touchscreen, dual microphones with sound source localization, and a 3W speaker for high-quality audio. With 16MB of Flash, 16MB of PSRAM, a microSD slot, 5V/3.7V power, and a USB-C connector, the EchoEar provides a comprehensive platform for building modern AI and IoT devices.

This compact development board, powered by the ESP32-S3 chip, is equipped with a dual-core 240 MHz Xtensa LX7 processor, a RISC-V coprocessor, 8 MB of Flash, and 8 MB of PSRAM, making it ideal for IoT projects and wireless applications. It features 2.4 GHz Wi-Fi, Bluetooth 5.0 + Mesh, LiPo battery charging with health monitoring, and an RGB LED for signaling. Featuring a 3D high-gain antenna, a u.FL connector, and a USB-C interface with USB Serial JTAG support, the TinyS3[D] combines functionality and a miniature form factor in one versatile platform.

The FeatherS3[D] is a development board based on the ESP32-S3 in the popular Feather form factor, combining the advantages of the previous FeatherS3 and FeatherS3 uFL models. Equipped with a dual-core Xtensa LX7 240MHz processor, a RISC-V coprocessor, 16MB Flash, and 8MB PSRAM, it delivers high performance and the ability to implement complex projects. The board supports 2.4GHz Wi-Fi, Bluetooth 5.0 + Mesh, two 3.3V regulators, a LiPo battery charging system with health monitoring, and an RGB LED.

This ESP32-S3-based development board features a dual-core 32-bit 240 MHz processor, 8 MB of Flash memory, and 2 MB of PSRAM. Equipped with 2.4 GHz Wi-Fi with a 3D antenna, a built-in 7x7 RGB LED matrix, and 22 GPIO pins, it enables the creation of advanced IoT projects, visualizations, and interactive interfaces. The module includes a LiPo battery management circuit, two 3.3V 700 mA regulators, and a USB-C connector with protection. FeatherS3 Neo

This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.

This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.