ESP32-S3-WROOM-1-N8 is intended for development of Internet of Things devices, automation systems, wireless sensors, controllers and communication modules requiring WiFi and Bluetooth Low Energy connectivity. The construction based on a dual-core Xtensa LX7 microcontroller clocked up to 240 MHz integrates 8 MB Flash memory, PCB antenna and extended peripheral interfaces available on the module pins. Compact SMD housing enables direct mounting on a PCB in production devices and professional electronic projects.
Manufacturer
Responsible person
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
Versatile communication module based on the ESP32 microcontroller, designed for industrial automation and as an IoT gateway for PLCs. It supports fieldbus standards such as CAN and RS485, as well as wireless technologies Wi-Fi, BLE and 4G LTE, which enables integration with industrial networks and the cloud. Thanks to its rugged design and support for programming in ESP-IDF, the EdgeBox-ESP-100 is suitable for remote control and monitoring in harsh industrial environments. Seeed Studio 102991735
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
No product available!
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
SMD IoT communication module with ESP32-S3 chip, supporting 2.4 GHz WiFi and Bluetooth BLE 5, equipped with PCB antenna and 8 MB Flash memory. Espressif ESP32-S3-WROOM-1-N8