![Main view Main view](https://kamami.pl/85077-large_default/esp32-s3-development-board-32-bit-lx7-dual-core-processor-integrates-gc9a01-display-driver-chip-w.jpg)
![Main view Main view](https://kamami.pl/85077-large_default/esp32-s3-development-board-32-bit-lx7-dual-core-processor-integrates-gc9a01-display-driver-chip-w.jpg)
zł62.13 tax excl.
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
ESP32-S3-LCD-1.28 is an inexpensive and efficient board with the ESP32 module equipped with a 1.28-inch round display. It is based on the ESP32-S3R2 chip, which is an SoC with Wi-Fi and Bluetooth 5.0 communication. The SoC has hardware encryption accelerators, RNG, HMAC and digital signing modules to meet the security requirements of the Internet of Things (IoT). Its various low power consumption modes are suitable for power requirements of IoT, mobile devices, wearable electronics, smart home applications and other applications.
1. ESP32-S3 | 7. GPIO 1,27mm |
2. W25Q128JVSIQ 16MB NOR-Flash | 8. BOOT button |
3. IMU QMI8658 | 9. RESET button |
4. LDO ME6217C33M5G 800 mA | 10. MX1.25 battery connector |
5. USB-UART CH343P | 11. USB type C |
6. LiPo ETA6096 Charger | 12. Antenna 2,4 GHz |
The ESP32-S3 module is designed with performance in mind and is equipped with a dual-core Xtensa 32-bit LX7 processor clocked at up to 240 MHz. The built-in SRAM with a capacity of 512 KB and ROM with a capacity of 384 KB is supported by an additional 2 MB PSRAM and external Flash memory with a capacity of 16 MB. The USB Type-C port allows for easy updates and maintenance.
There is a 1.28-inch screen on the board. It has a resolution of 240x240 pixels and can display content in the RGB 65K gamut. The built-in 6-axis QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope) is used to detect motion gestures. The board supports charging lithium batteries with a voltage of 3.7 V and has GPIO pins via connectors with a pitch of 1.27 mm. It integrates a full-speed USB port, and GPIO connectors allow for flexible pin function configuration, making it easy to adapt the system to various projects.
The ESP32-S3-LCD-1.28 is the perfect tool for creating IoT projects, wearable devices and other applications requiring a powerful microcontroller and user interface. With online support and use cases, you can quickly and easily get started with this development board and use it in your projects.
Cable with USB type A and USB type C plugs, length 1m, white
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
Espressif ESP32-C3 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
No product available!
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
A device with modifiable functionality that works under the control of the NodeMCU ESP32 system. It combines two wireless technologies: Bluetooth 4.1 and WiFi. iNode MCU USB
Compact M5Stack series development kit equipped with ESP32 Pico. It is based on a loudspeaker, I2S amplifier and a microphone. It will work in IoT-related projects, as a portable Bluetooth speaker or a voice-controlled device. M5Stack C008-C
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
No product available!
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4
No product available!
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775
Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico-M
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28