

zł135.53 tax excl.
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
ESP32-S3-Touch-LCD-4.3 is an inexpensive and efficient board with the ESP32 module equipped with a 4.3-inch touch screen. It is based on the ESP32-S3, which is an SoC with Wi-Fi and Bluetooth 5.0 communication. The SoC has hardware encryption accelerators, RNG, HMAC and digital signing modules to meet security requirements. The built-in capacitive touch screen can run GUI programs such as LVGL smoothly. Combined with various peripheral interfaces, suitable for the rapid development of HMI and other ESP32-S3 applications.
1. ESP32-S3N8R8 | 13. Micro SD socket |
2. LDO SGM2212-3.3 800 mA | 14. Sensor header |
3. FSUSB42UMX | 15. CAN header |
4. Touch panel connector | 16. I2C header |
5. USB type C (USB-UART) | 17. RS485 header |
6. USB type C | 18. Battery connector |
7. CAN TJA1051T/3/1J | 19. CAN terminal resistor |
8. CH422G | 20. RS485 terminal resistor |
9. BOOT button | 21. CH343P |
10. RESET button | 22. SP3485 |
11. MP3302DJ-LF-Z | 23. CS8501 |
12. Display connector | 24. Status indicator |
The ESP32-S3 module is designed with performance in mind and is equipped with a dual-core Xtensa 32-bit LX7 processor clocked at up to 240 MHz. The built-in SRAM with a capacity of 512 KB and ROM with a capacity of 384 KB is supported by an additional 8 MB PSRAM and external Flash memory with a capacity of 8 MB. The USB Type-C port allows for easy updates and maintenance.
The board has a 4.3-inch screen with a capacitive touch panel. It has a resolution of 800x480 pixels and can display content in the RGB 65K gamut. A set of connectors allows you to connect additional expansion modules via CAN, RS485 and I2C interfaces. The board supports charging 3.7 V lithium batteries. It integrates a full-speed USB port, and GPIO connectors allow for flexible configuration of pin functions, which makes it easy to adapt the system to various projects.
ESP32-S3-Touch-LCD-4.3 is the perfect tool for creating HMI projects and other applications requiring a powerful microcontroller and user interface. With online support and use cases, you can quickly and easily get started with this development board and use it in your projects.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
RS485 - Ethernet converter that provides easy communication between the RS485 and RJ45 Ethernet interface. Configurable via website or AT commands
No product available!
USB-RS485 converter for industrial applications. It provides communication between the USB interface and the RS485 serial standard. Waveshare USB TO RS485
No product available!
ESP32-C3-LCD-0.71 is an advanced, energy-efficient development board featuring a round IPS display and wireless communication. It enables projects involving user interfaces, IoT systems, data monitoring, and wearable devices. With its compact size and GUI support, it is ideal for integration into miniature HMI devices.
ESP32-C3-LCD-0.71-B is a compact, energy-efficient module with an IPS display and wireless connectivity, featuring a protective enclosure and lens. Ideal for portable projects such as watches, graphic interface sensors, simulation systems, or touch-controlled devices. With support for LVGL and flexible expansion options, it is suitable for a wide range of embedded applications.
Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
Advanced development plate that combines Wi-Fi and 802.15.4 technologies, providing support for the Thread 1.3 standard and Matter protocol, which makes it an ideal tool for building IoT solutions. Thanks to the integration of Host SOC and Co-Processor radio in one module, the tile allows you to quickly prototype and implement innovative applications, while offering functions such as two-way IPv6 and Service Discovery. Sparkfun WRL-25497
ESP32-S3-LCD-1.47 is a versatile development board equipped with a color display, support for Wi-Fi, Bluetooth, and 16 MB of Flash memory. Thanks to its rich hardware resources and compatibility with development libraries, it provides a solid platform for creating modern HMI interfaces, IoT devices, and interactive applications.
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
The ESP32-S3FH4R2 development board is based on the Xtensa 32-bit LX7 dual-core processor. It offers comprehensive wireless connectivity, including 2.4GHz Wi-Fi and Bluetooth LE. Equipped with 512 KB SRAM, 384 KB ROM, 2 MB PSRAM and 4 MB Flash memory, as well as a rich set of peripheral interfaces, the board is ideal for advanced technology projects and supports popular development environments such as ESP-IDF, MicroPython and Arduino IDE. Waveshare ESP32-S3-Tiny
ESP32-S3-Touch-AMOLED-1.43-B is a complete development board with a high-resolution AMOLED display, equipped with a modern ESP32-S3 microcontroller with Wi-Fi and Bluetooth LE, sensors, and extensive communication interfaces. The CNC enclosure ensures durability and aesthetics, making the solution suitable for mobile applications, wearable devices, HMI controllers, and measurement and control systems.
No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
No product available!
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
ESP32-P4-86-Panel-ETH-2RO is a compact built-in touch panel with ESP32-P4, designed for smart control, HMI interfaces, and industrial applications. It offers a rich set of interfaces, including Ethernet, RS485, and two independent relays, as well as support for multi-touch and Wi-Fi 6 wireless communication. Ideal for use in home and industrial automation, where integration, security, and performance are essential.
No product available!
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3