ESP32-S3 development board with 2.41″ AMOLED touch display 600x450 + case - Waveshare 30589

Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER

An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.

Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series

Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377

M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B

Development kit with an ESP32 module featuring a 1.28-inch round display. Offers Wi-Fi and Bluetooth 5.0 communication. Perfect for IoT projects with a simple GUI. Espressif ESP32-C3-LCDkit

ESP32-S3-LCD-2-C is an integrated development board with a 2" display and an included OV5640 camera, combining display, wireless connectivity, and video acquisition functions in a single module. Thanks to support for an accelerometer, TF card slot, USB-C power supply, and extensive GPIO interfaces, the board is suitable for applications such as portable monitoring systems, image recording, and interactive IoT projects.

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

ESP32-S3-Touch-AMOLED-1.75 is a standard ESP32-S3 development board with an AMOLED display, touch, microphones, sensors, and Wi-Fi/Bluetooth support. It is suitable for building compact IoT and HMI devices where touch interaction, wireless communication, and audio support are essential.

ESP32-S2-DevKitC-1-N8R2 is an evaluation board designed for developing IoT applications using 2.4 GHz Wi-Fi. It features a high-performance microcontroller, large Flash and PSRAM memory, and a wide range of communication interfaces. With an integrated antenna, micro USB connector, and full access to GPIOs, it serves as a versatile tool for embedded system designers, automation engineers, and electronics enthusiasts.

KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components

Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter

ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK

Espressif ESP32-P4-Function-EV-Board – a development board with Wi-Fi 6, Bluetooth 5, a 7” TFT display, a 2 MP camera, and MIPI-CSI/DSI support. Espressif ESP32-P4-Function-EV-Board

A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules

A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED