ESP32-S3 development board with 2.41″ AMOLED touch display 600×450 - Waveshare 30563

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5399

This 32-bit RISC-V development board, running at up to 160 MHz, is designed for AIoT and human-computer interface applications. Featuring a 1.43-inch, 466x466-pixel AMOLED display and an FT6146 touch controller, it delivers detailed graphics and interactive experiences. The board features Wi-Fi 6, Bluetooth 5, and Zigbee/Thread connectivity, dual digital microphones, audio playback and recording, and the ability to connect a lithium battery or power via USB-C. ESP32-C6-Touch-AMOLED-1.43

Development board with ESP-WROOM-32 module. It allows communication within the WiFi network and the Bluetooth 4.2 (BLE) standard

A device with modifiable functionality that works under the control of the NodeMCU ESP32 system. It combines two wireless technologies: Bluetooth 4.1 and WiFi. iNode MCU USB

A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484

ESP32-C6-DEV-KIT-N16-M is an evaluation board for projects requiring modern wireless connectivity and high performance with low power consumption. Support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread makes it an ideal choice for smart home applications, industrial automation, and consumer electronics. Integrated connectors and USB/UART interfaces facilitate rapid development and prototyping.

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3

An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.

A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"

Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53

ESP32-S3R8 microcontroller development board featuring a 3.16-inch 320x820 color LCD display with an ST7701 controller. It offers 2.4GHz Wi-Fi and Bluetooth 5 connectivity, 16MB of Flash, and 8MB of PSRAM for high performance and support for rich graphics interfaces (LVGL). Onboard features include a QMI8658 motion sensor (6-axis IMU), a PCF85063 RTC, a microSD slot, UART/I2C/USB connectors, a 3.7V battery connector with charging, and a USB Type-C port. Waveshare ESP32-S3-LCD-3.16

KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components

A development board based on a dual-core RISC-V 400 MHz processor, supporting AI instructions, MIPI-CSI/DSI interfaces, and enabling image and voice processing. With an integrated ESP32-C6 module, it offers Wi-Fi 6 and Bluetooth 5 connectivity, as well as a USB OTG interface, microphone, TF slot, and 32 MB PSRAM for advanced IoT and AI applications. Its compact size and rich features make it ideal for smart cameras, interactive displays, and robotics. DFRobot DFR1172

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8

ESP32-S3-Korvo-2 is an advanced AIoT development board with powerful AI acceleration and robust security features, ideal for smart homes and industrial automation. The board supports Wi-Fi and Bluetooth 5 (LE), enabling a wide range of wireless connections.