![Main view Main view](https://kamami.pl/83375-large_default/esp32-s3-development-board-with-1-28inch-round-touch-lcd-compact-size-accelerometer-and-gyroscope.jpg)
![Main view Main view](https://kamami.pl/83375-large_default/esp32-s3-development-board-with-1-28inch-round-touch-lcd-compact-size-accelerometer-and-gyroscope.jpg)
zł84.38 tax excl.
A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
ESP32-S3-Touch-LCD-1.28 is an inexpensive and efficient board with the ESP32 module equipped with a 1.28-inch touch screen. It is based on the ESP32-S3R2 chip, which is an SoC with Wi-Fi and Bluetooth 5.0 communication. The SoC has hardware encryption accelerators, RNG, HMAC and digital signing modules to meet the security requirements of the Internet of Things (IoT). Its various low power consumption modes are suitable for power requirements of IoT, mobile devices, wearable electronics, smart home applications and other applications.
1. ESP32-S3 | 6. IMU QMI8658 |
2. W25Q128JVSIQ 16MB NOR-Flash | 7. MX1.25 battery connector |
3. USB-UART CH343P | 8. USB type C |
4. LDO ME6217C33M5G 800 mA | 9. RESET |
5. LiPo charger ETA6096 | 10. BOOT |
The ESP32-S3 module is designed with performance in mind and is equipped with a dual-core Xtensa 32-bit LX7 processor clocked at up to 240 MHz. The built-in SRAM with a capacity of 512 KB and ROM with a capacity of 384 KB is supported by an additional 2 MB PSRAM and external Flash memory with a capacity of 16 MB. The USB Type-C port allows for easy updates and maintenance.
The board has a 1.28-inch screen with a capacitive touch panel. It has a resolution of 240x240 pixels and can display content in the RGB 65K gamut. The built-in 6-axis QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope) is used to detect motion gestures. The board supports charging 3.7 V lithium batteries and has 6 GPIO pins via the SH1.0 connector. It integrates a full-speed USB port, and GPIO connectors allow for flexible pin function configuration, making it easy to adapt the system to various projects.
The ESP32-S3-Touch-LCD-1.28 is the perfect tool for creating IoT projects, wearable devices and other applications requiring a powerful microcontroller and user interface. With online support and use cases, you can quickly and easily get started with this development board and use it in your projects.
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB type A and USB type C plugs, length 1m, white
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
No product available!
Board with WiFi and BLE Espressif ESP32-S3 module and OV2640 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868
Board with the WiFi ESP-12F (ESP8266) module and a 5 V relay. Equipped with an AC adapter
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED
Development board with WiFi ESP32-S2 module and 1.54" TFT LCD display. Equipped with a pressure, temperature and humidity sensor. Dedicated to build a home automation system. Adafruit 4985
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes
Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER
No product available!
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28