ESP32-S3 development board with 1.54" e-paper display, 200 × 200 px, AIoT, Wi-Fi/Bluetooth – Waveshare 32299
ID: 1201197
5902186330528
zł78.38
Tax included
zł63.72 tax excl.
ESP32-S3-ePaper-1.54-EN is an energy-efficient development board with an e-paper display, Wi-Fi, Bluetooth and audio functions, designed for portable IoT projects and user interfaces. Version without an included battery, with full functionality of the power and charging circuit.
Description
ESP32-S3-ePaper-1.54-EN is a compact AIoT development board equipped with a 1.54" e-paper display with a resolution of 200 × 200 pixels, designed for low-power portable applications. It is based on the ESP32-S3 microcontroller with a dual-core Xtensa LX7 processor running up to 240 MHz and supports wireless communication via Wi-Fi 2.4 GHz and Bluetooth 5 LE. The integrated E Ink display provides excellent readability in daylight and near-zero power consumption in static mode.
The board also includes a MEMS microphone, ES8311 audio codec, SHTC3 temperature and humidity sensor, microSD card slot, programmable BOOT and PWR buttons, battery charging management circuit and GPIO, UART and I2C connectors. The “EN” version does not include a lithium battery in the set.
Properties
- Microcontroller ESP32-S3-FH4R2 (2× Xtensa LX7, 240 MHz)
- Memory: 512 KB SRAM, 384 KB ROM, integrated Flash and PSRAM
- 1.54" e-paper display, 200 × 200 px, black and white
- E Ink technology (passive display, high contrast, viewing angle >170°)
- Full refresh time: 2 s, partial: 0.3 s
- Connectivity: Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth 5 LE
- MEMS microphone + ES8311 audio codec
- SHTC3 temperature and humidity sensor
- RTC PCF85063 (on bottom side)
- MicroSD (TF) slot, FAT32
- 3.7 V lithium battery connector (MX1.25 2-pin) with charging circuit
- Speaker connector MX1.25 2-pin
- USB Type-C connector for programming and data
- BOOT and PWR buttons (programmable)
- 2 × 6-pin female headers 2.54 mm (GPIO/UART/I2C)
- Built-in ceramic antenna
- Dimensions: 53.0 × 39.8 × 16.9 mm
- Display area: 27.8 × 27.8 mm
- Connector and button layout consistent with documentation
1201197
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł399.01
24h
Available quantity: 2
Available
Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124
zł48.89
24h
Available quantity: 4
Available
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
zł123.06
24h
Available quantity: 1
Available
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
zł104.83
1 weeks
No product available!
ESP32-S3-DevKitC-1U-N8R8 board with Wi-Fi, BLE, 8 MB flash, and 8 MB PSRAM for IoT projects and AI applications. Espressif ESP32-S3-DevKitC-1U-N8R8
zł77.90
24h
Available quantity: 1
Available
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero
zł23.43
4 weeks
No product available!
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
zł17.70
4 weeks
No product available!
Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero-M
zł25.60
4 weeks
No product available!
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M
zł21.54
24h
Available quantity: 4
Available
Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925
zł109.41
24h
Available quantity: 1
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
zł35.03
4 weeks
No product available!
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M
zł36.06
24h
Available quantity: 1
Available
A board with an ESP32 module equipped with a 1.28-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-Touch-LCD-1.28
zł95.58
24h
Available quantity: 3
Available
A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3
zł165.42
24h
Available quantity: 5
Available
Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM
zł17.74
4 weeks
No product available!
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
zł55.01
3 weeks
No product available!
ESP32-S3-ePaper-1.54-EN is an energy-efficient development board with an e-paper display, Wi-Fi, Bluetooth and audio functions, designed for portable IoT projects and user interfaces. Version without an included battery, with full functionality of the power and charging circuit.