ESP32-S3 development board with 2 × 1.28" touch LCD, AIoT, Wi-Fi/Bluetooth 5 – 32265
ID: 1201199
5902186330542
zł138.56
Tax included
zł112.65 tax excl.
ESP32-S3-DualEye-Touch-LCD-1.28 is a functional AIoT board with two touch displays, Wi-Fi, Bluetooth and voice support. Thanks to the combination of touch control, audio processing and graphic capabilities, it is perfectly suited for building modern user interfaces, robotics, wearable devices and smart home applications.
Description
ESP32-S3-DualEye-Touch-LCD-1.28 is an advanced AIoT development board with two round 1.28" IPS screens (240 × 240 px) equipped with capacitive touch panels. The ESP32-S3R8 chip with a dual-core Xtensa LX7 processor (up to 240 MHz) provides high performance, and the built-in 16 MB Flash and 8 MB PSRAM allow support for complex graphical interfaces (e.g., LVGL). The board supports 2.4 GHz Wi-Fi and Bluetooth 5 LE, as well as integration with AI systems for voice interaction.
Touch is controlled via the I2C bus with interrupt support, enabling real-time interaction. The board includes a microphone, speaker connector, ES8311 audio codec and ES7210 ADC, along with an integrated 3.7 V battery charging circuit. Available SH1.0 14-pin and FPC 18-pin connectors allow easy expansion and integration with other modules.
Properties
- Microcontroller ESP32-S3R8 (Xtensa LX7, 2×240 MHz)
- Memory: 16 MB Flash, 8 MB PSRAM, 512 KB SRAM
- 2 × 1.28" IPS display (240 × 240, 65K colors)
- Capacitive touch panel (I2C, with interrupt support)
- Connectivity: Wi-Fi 802.11 b/g/n 2.4 GHz, Bluetooth 5 LE
- Display interface: SPI
- Microphone, ES8311 (audio codec), ES7210 (ADC)
- TF (microSD) card slot
- 3.7 V battery charging support (MX1.25 2-pin)
- Connectors: SH1.0 14-pin, FPC 18-pin
- USB Type-C connector
Included
- ESP32-S3-DualEye-Touch-LCD-1.28 ×1
- SH1.0 14-pin cable (~100 mm) ×1
- FFC 18-pin cable (~200 mm) ×1
- Speaker 8 Ω, 2 W (MX1.25 2-pin) ×1
1201199
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
zł16.90
24h
Available quantity: 96
Available
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
zł38.93
24h
Available quantity: 3
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
zł105.37
24h
Available quantity: 1
Available
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
zł49.19
24h
Available quantity: 5
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
zł152.38
4 weeks
No product available!
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
zł157.76
24h
Available quantity: 1
Available
A board with a built-in ESP-WROOM-32 module and an 0.96 "OLED display (SSD1306) with a resolution of 128x64. The ESP32 system enables communication of WiFi 2.4 GHz and Bluetooth BLE v4.2 networks. modESP32_OLED
zł35.72
24h
Available quantity: 2
Available
Expansion module with a DAC/ADC converter and a camera dedicated to FireBeetle ESP32. It allows you to create versatile IoT applications. DFRobot DFR0498
zł111.20
24h
Available quantity: 4
Available
Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377
zł201.38
24h
Available quantity: 3
Available
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
zł32.90
1 weeks
No product available!
Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575
zł57.17
24h
Available quantity: 3
Available
The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4
zł28.02
4 weeks
No product available!
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł55.12
24h
Available quantity: 1
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
zł245.39
4 weeks
No product available!
Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER
zł136.15
4 weeks
No product available!
IoT development board equipped with ESP32 chip with WiFi and Bluetooth, has a USB-UART interface allowing programming via the USB port of the computer. DFRobot DFR0625
zł101.18
24h
Available quantity: 2
Available
ESP32-S3-DualEye-Touch-LCD-1.28 is a functional AIoT board with two touch displays, Wi-Fi, Bluetooth and voice support. Thanks to the combination of touch control, audio processing and graphic capabilities, it is perfectly suited for building modern user interfaces, robotics, wearable devices and smart home applications.