ESP32-S3 Reverse TFT Feather - WiFi and BLE module with ESP32-S3 chip and LCD display

Expansion module with a DAC/ADC converter and a camera dedicated to FireBeetle ESP32. It allows you to create versatile IoT applications. DFRobot DFR0498

The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478

Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438

KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components

ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK

A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28

Advanced development plate that combines Wi-Fi and 802.15.4 technologies, providing support for the Thread 1.3 standard and Matter protocol, which makes it an ideal tool for building IoT solutions. Thanks to the integration of Host SOC and Co-Processor radio in one module, the tile allows you to quickly prototype and implement innovative applications, while offering functions such as two-way IPv6 and Service Discovery. Sparkfun WRL-25497

A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323

ESP-PROG is an advanced tool for programming and debugging Espressif microcontrollers such as ESP32, ESP32-C3, ESP32-S2, ESP32-S3 and ESP8266. With the built-in FT2232HL USB bridge, ESP-PROG converts the USB 2.0 interface to serial and parallel interfaces, offering functions of automatic firmware download, serial communication and online debugging via JTAG

Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663