ESP32-P4-Module-32MB - Module with ESP32-P4 and ESP32-C6 Wi-Fi/Bluetooth microcontrollers - Waveshare 32604

FireBeetle 2 ESP32-P4 kit with IO board is a powerful platform for developing AI devices and vision systems, integrating video encoding, touch, Wi-Fi 6, and Bluetooth 5. It is ideal for building intelligent HMI panels, face recognition cameras, and computer vision-based solutions.

Smartwatch-type development board based on the ESP32-S3 microcontroller, equipped with a 2.06 inch AMOLED touchscreen display with 410 x 502 resolution, a 32-bit dual-core LX7 processor, QSPI interface and an onboard dual digital microphone. Display version without MX1.25 lithium battery. Waveshare ESP32-S3-Touch-AMOLED-2.06-EN

ESP32-S3-Touch-AMOLED-2.06 is a complete development platform for designing wearable devices with an AMOLED display, touch control, audio, wireless connectivity, and AI features. Thanks to its compact design and built-in battery, it is suitable as a foundation for smartwatches, data loggers, and IoT devices.

Development board based on the ESP32-C6 microcontroller with a round 1.43 inch capacitive AMOLED display with 466 x 466 resolution, a 160 MHz RISC-V processor, QSPI interface and an onboard dual microphone. Version with a protective case. Waveshare ESP32-C6-Touch-AMOLED-1.43-B

This 32-bit RISC-V development board, running at up to 160 MHz, is designed for AIoT and human-computer interface applications. Featuring a 1.43-inch, 466x466-pixel AMOLED display and an FT6146 touch controller, it delivers detailed graphics and interactive experiences. The board features Wi-Fi 6, Bluetooth 5, and Zigbee/Thread connectivity, dual digital microphones, audio playback and recording, and the ability to connect a lithium battery or power via USB-C. ESP32-C6-Touch-AMOLED-1.43

ESP32-P4-Module is a module featuring two chips: ESP32-P4 and ESP32-C6, offering support for 2.4 GHz Wi-Fi in the 802.11 b/g/n/ax standard and Bluetooth 5.3. With large memory, image and voice processing capabilities, and built-in security features, it is suitable for IoT applications, HMI, image and voice recognition systems, and smart industry.

A development kit based on the ESP32-P4 microcontroller, featuring a 10.1-inch DSI capacitive touch display, 100 Mbps Ethernet with PoE support, camera module, and AI speech capabilities. Designed for advanced HMI, multimedia, and edge computing projects, it offers rich interfaces, high performance, and suitability for IoT and industrial applications. Waveshare ESP32-P4-POE-ETH-KIT-B

Development kit based on the high-performance ESP32-P4 microcontroller with a 100 Mbps Ethernet port, PoE support, and AI voice interaction. The KIT-A version includes the development board, PoE module, camera, and audio accessories, designed for HMI, edge computing, and IoT applications. Waveshare ESP32-P4-POE-ETH-KIT-A

A development board based on the high-performance ESP32-P4 microcontroller, equipped with a 100 Mbps Ethernet port and support for PoE (Power over Ethernet). This version includes the ESP32-P4-ETH-M board together with a PoE module and is intended for integration in HMI projects, edge computing applications, and IoT systems requiring wired network communication. Waveshare ESP32-P4-POE-ETH

Development board based on the high-performance ESP32-P4 microcontroller, featuring a 100 Mbps RJ45 Ethernet port and a rich set of multimedia and communication interfaces. The ESP32-P4-ETH-M version includes only the board with factory-soldered pin headers and is intended for standalone integration in HMI, edge computing, and IoT projects. Waveshare ESP32-P4-ETH-M

Development board based on the high-performance ESP32-P4 microcontroller, equipped with a 100 Mb/s RJ45 Ethernet port and a wide range of multimedia and communication interfaces. The Waveshare 32086 version includes only the ESP32-P4-ETH board without soldered pin headers, intended for custom assembly and integration in HMI, edge computing and IoT projects. Waveshare ESP32-P4-ETH

This development board combines Wi-Fi, Bluetooth, and LoRa technologies, ideal for IoT projects requiring long-range communication. Equipped with a dual-core 240 MHz processor and an 868 MHz SX1262 modem, it provides a transmission range of up to several kilometers with low power consumption. It features a built-in 0.96-inch OLED display, a CP2102 USB-to-UART converter, and a lithium battery charging circuit for mobile operation. Heltec Lora32-V3 868MHz

An intelligent AI development kit based on the ESP32-S3-WROOM-1-N16R16VA chip, designed for building advanced voice and multimedia interaction systems. The device supports 2.4 GHz Wi-Fi, Bluetooth 5 (LE), and offers integration with AI frameworks such as OpenAI and Gemini, enabling full-duplex voice communication. It features a 1.85-inch 360x360 touchscreen, dual microphones with sound source localization, and a 3W speaker for high-quality audio. With 16MB of Flash, 16MB of PSRAM, a microSD slot, 5V/3.7V power, and a USB-C connector, the EchoEar provides a comprehensive platform for building modern AI and IoT devices.

This compact development board, powered by the ESP32-S3 chip, is equipped with a dual-core 240 MHz Xtensa LX7 processor, a RISC-V coprocessor, 8 MB of Flash, and 8 MB of PSRAM, making it ideal for IoT projects and wireless applications. It features 2.4 GHz Wi-Fi, Bluetooth 5.0 + Mesh, LiPo battery charging with health monitoring, and an RGB LED for signaling. Featuring a 3D high-gain antenna, a u.FL connector, and a USB-C interface with USB Serial JTAG support, the TinyS3[D] combines functionality and a miniature form factor in one versatile platform.

The FeatherS3[D] is a development board based on the ESP32-S3 in the popular Feather form factor, combining the advantages of the previous FeatherS3 and FeatherS3 uFL models. Equipped with a dual-core Xtensa LX7 240MHz processor, a RISC-V coprocessor, 16MB Flash, and 8MB PSRAM, it delivers high performance and the ability to implement complex projects. The board supports 2.4GHz Wi-Fi, Bluetooth 5.0 + Mesh, two 3.3V regulators, a LiPo battery charging system with health monitoring, and an RGB LED.

This ESP32-S3 development board is designed for demanding IoT and embedded systems projects. Equipped with a dual-core 240 MHz processor, a RISC-V coprocessor, 16 MB of Flash, and 8 MB of PSRAM, it offers high performance and flexibility. It also includes two 3.3 V regulators, a LiPo charging circuit with battery monitoring, a STEMMA QT connector, and a software antenna switch between the 3D High Gain antenna and u.FL. ProS3[D]