ESP32 Basic Core v2.7 development kit - M5Stack K001-V27
ID: 1202348
5902186333611
zł210.33
Tax included
zł171.00 tax excl.
ESP32-based development kit with a 2" IPS display, 16MB Flash memory, Li-Po battery, integrated speaker, and exposed IO interfaces. M5Stack K001-V27
Description
M5Stack K001-V27 is intended for prototyping IoT solutions, automation, and control systems based on the ESP32 microcontroller. The ESP32-D0WDQ6-V3 chip with a dual-core Xtensa LX6 processor clocked up to 240MHz provides support for WiFi 2.4GHz and Bluetooth communication, enabling the development of networked and wireless applications.
The module integrates a 2.0" IPS color display, an integrated speaker, a TF card slot, a Li-Po battery, and a wide range of communication interfaces, allowing the creation of autonomous devices without the need for additional boards. A full PC enclosure improves operational stability in industrial environments, while 15 IO lines exposed on the bottom bus enable easy expansion with sensors and modules from the M5Stack system. The kit is supported by UiFlow, Arduino IDE, ESP-IDF, and PlatformIO.
A video presenting the kit contents and basic information about setup and module capabilities.
Features
- Microcontroller: ESP32-D0WDQ6-V3
- Processor: dual-core Xtensa LX6, up to 240MHz
- Flash memory: 16MB
- SRAM: 520kB
- Wireless connectivity: WiFi 2.4GHz, Bluetooth
- Display: 2.0" IPS LCD, 320 x 240 px, brightness up to 853 nit
- Integrated speaker: 1W
- Buttons: 3 physical buttons
- Interfaces: USB Type-C, I2C, SPI, UART, ADC, DAC
- Number of IO lines: 15
- Antenna: 2.4G 3D antenna
- Power supply: 5V@500mA
- Battery: Li-Po 110 mAh, 3.7V
- USB chip: CH9102F
- Enclosure material: PC
- Operating temperature: 0°C ~ 40°C
- Dimensions: 54.0 x 54.0 x 17.0 mm
- Weight: 52.6 g
Kit includes
- 1x M5Stack Basic Core v2.7 module
- 10x Dupont jumper wires
- 1x USB Type-C cable 20cm
1202348
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł36.69
24h
Available quantity: 2
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.89
4 weeks
No product available!
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł227.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Board with WiFi and BLE Espressif ESP32-S3 module and OV3660 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
zł64.89
24h
Available quantity: 56
Available
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
zł339.01
24h
Available quantity: 1
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 2
Available
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
Regular pricezł128.68zł105.31
24h
Available quantity: 2
Available
Waterproof controller with ESP32 module in an industrial-grade housing designed for demanding applications. It uses the Espressif ESP32 chip with the Xtensa® 32-bit LX6 core and a built-in Wi-Fi module. It is equipped with a 2-inch IPS display with a touch panel. M5stack K034
zł250.02
24h
Available quantity: 1
Available
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
zł399.01
1 weeks
No product available!
Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124
zł48.89
24h
Available quantity: 2
Available
Development board based on the ESP32-C3-MINI-1 module. It offers the ability to connect via WiFi, Bluetooth version 5 and Bluetooth Mesh. It is equipped with sensors, such as the SHTC3 temperature and humidity sensor or the IMU 6 DoF ICM-42670-P sensor. Espressif Systems ESP32-C3-DevKit-RUST-1
zł123.06
24h
Available quantity: 1
Available
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
zł104.83
1 weeks
No product available!
ESP32-based development kit with a 2" IPS display, 16MB Flash memory, Li-Po battery, integrated speaker, and exposed IO interfaces. M5Stack K001-V27