zł92.84 tax excl.
Waveshare RGB matrix driver board with a HUB75 interface, based on the ESP32-S3-N32R16 module with a dual-core 240MHz Xtensa LX7 processor, 32MB Flash and 16MB PSRAM. The board integrates 2.4GHz WiFi, Bluetooth 5 LE, dual microphones, audio circuitry, a 6-axis IMU, temperature and humidity sensor, RTC and TF card slot for LED matrix interfaces and voice-enabled applications. Waveshare ESP32-S3-RGB-Matrix
The Waveshare ESP32-S3-RGB-Matrix board is designed for controlling RGB LED matrix panels using the HUB75 interface. Based on the ESP32-S3-N32R16 module, it combines display control with wireless communication, audio processing, sensors and mass storage support. The board can be used for information panels, control interfaces, clocks, LVGL applications, IoT devices and projects incorporating voice interaction.
The ESP32-S3 uses a dual-core 32-bit Xtensa LX7 processor running at up to 240MHz. The N32R16 variant provides 32MB of Flash memory and 16MB of PSRAM, while the chip also includes 512KB SRAM and 384KB ROM. The additional PSRAM is useful for graphics buffers and more advanced user interfaces displayed on RGB matrix panels.
Wireless connectivity includes 2.4GHz WiFi and Bluetooth 5 LE. Two onboard microphones, an ES8311 audio codec and an ES7210 audio circuit support applications involving audio processing, speech recognition and voice commands. A dedicated speaker connector allows a speaker to be connected directly to the board.
Additional onboard hardware includes a QMI8658 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope, an SHTC3 temperature and humidity sensor and a PCF85063 real-time clock. An SH1.0 RTC battery connector allows timekeeping to continue when the main power supply is disconnected. The TF card slot can store graphics, audio files and other application data.
The board provides a HUB75 RGB matrix interface and a dedicated 5V power output for LED panels. According to the manufacturer, the design can support up to six 64 × 64 Waveshare Matrix-RGB panels with cascading available for larger display configurations. An additional GPIO expansion header allows external peripherals and custom hardware to be connected.
Two USB Type-C connectors are provided for power and for communication, programming and debugging. Development is supported through ESP-IDF and Arduino IDE, making the board suitable for both rapid prototyping and more advanced applications combining RGB matrices, multimedia and network communication.
Basic parameters
Communication
Audio
Sensors and additional hardware
RGB matrix control
Dimensions
Development environments
Manufacturer
Responsible person
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
No product available!
A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28
ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8
A development board that uses the ESP32-C3 chip based on the RISC-V architecture. It has built-in 400 KB of SRAM and 4 MB of Flash memory and a clock frequency of 160 MHz. Pro Micro offers a Qwiic connector that allows you to connect any sensor that communicates via the I2C bus. SparkFun DEV-23484
The ESP32-S3-BOX-3 is a development kit based on the ESP32-S3 SoC, ideal for creating AIoT, Edge AI, and IIoT applications. The ESP32-S3-WROOM-1 module supports WiFi 802.11 b/g/n (2.4 GHz) and Bluetooth 5.0, features 36 configurable GPIO pins, and includes a PCB antenna. It operates within a temperature range of -40 to +85°C with a supply voltage of 3.0 - 3.6V. The kit supports software solutions like ESP-BOX, ESP-SR, ESP-RainMaker, and ESP-Matter, facilitating the development of advanced IoT systems. ESP32-S3-BOX-3
Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano-M
Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with soldered connectors. Waveshare ESP32-H2-DEV-KIT-N4-M
Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4
No product available!
The ESP32-C6 is a versatile microcontroller with support for WiFi 6 and Bluetooth 5, designed for a wide range of applications in smart homes, industry, and consumer electronics. With support for multiple interfaces and development environments, this board offers the flexibility and performance needed to execute advanced projects. Compatibility with Raspberry Pi Pico HAT extensions further enhances its capabilities, making it an ideal choice for developers and engineers. Waveshare 26845
The ESP32-C6 is a versatile microcontroller with support for WiFi 6 and Bluetooth 5, designed for a wide range of applications in smart homes, industry, and consumer electronics. With support for multiple interfaces and development environments, this board offers the flexibility and performance needed to execute advanced projects. Compatibility with Raspberry Pi Pico HAT extensions further enhances its capabilities, making it an ideal choice for developers and engineers. Waveshare 26866
Development board for IoT applications, cellular communication and remote monitoring systems, equipped with ESP32-S3R8 and the A7670E-FASE module supporting LTE Cat-1, 2G and GNSS. It offers 2.4 GHz WiFi and Bluetooth LE connectivity, 8 MB PSRAM, 16 MB Flash, a camera interface, microSD/TF card slot, and power supply and charging circuits for USB, a 18650 battery or a solar panel. The current kit version includes an OV5640 camera. Waveshare ESP32-S3-A7670E-4G-EN, rev. 2.0
No product available!
The ESP32-S3 SIM7670G 4G development board combines the ESP32-S3R2 microcontroller with the SIM7670G module, offering global LTE Cat-1, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-SIM7670G-4G-EN
No product available!
A development board featuring the ESP32-C6 WROOM-1-N16 module from Espressif. It features a single-core RISC-V processor and a wide range of connectivity options, including 2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4). The module is Feather-compatible and provides 23 GPIO pins on 2.54 mm pitch connectors. SparkFun DEV-22924
A shield designed to collect data from the MyoWare 2.0 Muscle Sensor and transmit it wirelessly using the ESP32-WROOM module. Equipped with a built-in 40 mAh LiPo battery. SparkFun DEV-23387
No product available!
Waveshare RGB matrix driver board with a HUB75 interface, based on the ESP32-S3-N32R16 module with a dual-core 240MHz Xtensa LX7 processor, 32MB Flash and 16MB PSRAM. The board integrates 2.4GHz WiFi, Bluetooth 5 LE, dual microphones, audio circuitry, a 6-axis IMU, temperature and humidity sensor, RTC and TF card slot for LED matrix interfaces and voice-enabled applications. Waveshare ESP32-S3-RGB-Matrix