Development board with 3.49" touch screen and ESP32-S3R8 with Case A enclosure – Waveshare 32374

Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700

The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8

The ESP32-S3-LCD-5 board with a 5-inch 800×480 screen offers a wide range of features for creating user interfaces and communication applications using the ESP32-S3. With support for 2.4 GHz Wi-Fi and Bluetooth 5 LE, optically isolated digital I/O, and flexible power options, the module is suitable for HMI systems, industrial automation, and IoT projects requiring high-performance graphics without the need for touch functionality.

Versatile ESP32 module with LoRa and Wi-Fi support, designed for monitoring people flow and creating mesh networks in difficult conditions, such as in areas cut off from the network. The device can detect Wi-Fi and Bluetooth signals, allowing estimation of the number of mobile devices in the environment without recording MAC addresses, which protects privacy. The module offers low power consumption, data storage on SD card and data transfer via LoRa WAN or MQTT, making it a reliable and self-sufficient solution for emergency communication. modTTGO LoRa32 v2.1

Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114

ESP32-S3-Touch-LCD-3.5B-C is a complete development system with an IPS display, camera, and wireless connectivity, designed for interactive applications involving voice, image, and touch. Intended for advanced IoT projects, smart terminals, control panels, and offline AI applications.

ESP32-S3-POE-ETH enables the development of advanced projects with remote power supply and data transfer capabilities. This solution is especially useful in industrial installations, IP monitoring, control systems, and applications based on ESP32 and the Raspberry Pi ecosystem.

ESP32-S3-Touch-LCD-2.1 in the flat panel version is an advanced platform for developing interactive applications with a touch graphic interface. Thanks to its extensive feature set, including wireless connectivity, PSRAM memory, sensors, and battery power support, it is suitable for mobile devices, HMI interfaces, monitoring systems, and IoT projects.

Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377

A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3

The ESP32-S3-Touch-LCD-1.69 board integrates Wi-Fi/Bluetooth microcontroller functionality with a color touch screen, IMU sensor, and RTC clock, offering a development platform for compact applications with a user interface. It is dedicated to use in wearable devices, HMI terminals, activity trackers, and modern low-power IoT solutions.

Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD

Development board based on the ESP32-WROOM-32UE-N16R2 module, equipped with 16MB Flash and 2MB PSRAM, ideal for projects with a graphical user interface. It supports WiFi, Bluetooth, numerous peripheral interfaces (UART, I2C, SPI, I2S, DAC) and two power supply modes - USB-C and 3.7V battery - with an automatic switching function. Thanks to its compact dimensions, external antenna and support for Arduino IDE, ESP-IDF and MicroPython, it is perfect for IoT applications, automation and intelligent sensors. DFRobot DFR1140

Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575

ESP32-S3-Touch-LCD-5 is a functional development board featuring a 5" IPS display with 800×480 resolution and a touchscreen panel, based on the ESP32-S3 microcontroller. With a wide range of interfaces and support for embedded and HMI systems, it is well-suited for applications in automation, control systems, and interactive devices.

A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28