zł101.78 tax excl.
Advanced development board equipped with a 2.8-inch 240x320 pixel LCD display and 5-point touch control, making it ideal for IoT and HMI applications. With a dual-core 240MHz ESP32-S3 processor, 16MB Flash and 8MB PSRAM, the board supports advanced applications and real-time interactions. Additionally, built-in Wi-Fi, Bluetooth 5.0, a 6-axis sensor, a micro SD slot and battery power make the device versatile and ideal for mobile projects. Waveshare ESP32-S3-Touch-LCD-2.8
ESP32-S3-Touch-LCD-2.8 is a versatile development board equipped with a 2.8-inch LCD display with a resolution of 240×320 pixels. Powered by the ESP32-S3 processor with dual cores running at 240 MHz, the board is capable of handling demanding real-time applications, making it ideal for Internet of Things (IoT) projects and Human-Machine Interface (HMI) systems. It features a 5-point touch control interface via I2C (available in the touch version), allowing for smooth and intuitive user interaction with the device.

| 1. ESP32-S3R8 | 13. Power button for battery control |
| 2. 16MB Flash memory | 14. RESET button |
| 3. QMI8658C (6-axis IMU) | 15. BOOT button |
| 4. PCF85063 RTC | 16. USB Type-C port |
| 5. PCM5101 audio decoder | 17. 12-pin multifunction connector |
| 6. Amplifier circuit | 18. I2C connector |
| 7. Volume control knob | 19. UART connector |
| 8. Battery charging circuit | 20. MX1.25 battery connector |
| 9. ME6217C33M5G | 21. RTC battery connector |
| 10. Built-in ceramic antenna | 22. Speaker connector |
| 11. IPEX1 connector and switching resistor | 23. Power indicator |
| 12. MicroSD slot | 24. Charging indicator |
The board offers extensive communication capabilities thanks to the built-in Wi-Fi 2.4 GHz and Bluetooth 5.0 LE, allowing for easy integration with networks and other devices. With 512 KB of SRAM, 384 KB of ROM, 16 MB of Flash, and 8 MB of PSRAM, the board provides sufficient memory to store applications, including those with demanding graphical interfaces. Additionally, the built-in sensors, including the 6-axis QMI8658 sensor (accelerometer and gyroscope), RTC chip, and microSD card slot (up to 16 GB), expand the device's capabilities, enabling its use in various mobile and automation applications. The board is powered by a 3.7V Li-ion battery, which can be charged through the built-in power management module, enabling portable use. With USB Type-C, the board is easy to connect and program, and its additional ports allow for expansion with various accessories. Thanks to its low energy requirements and power-saving features, the ESP32-S3-Touch-LCD-2.8 is an ideal solution for rapid prototyping of IoT devices, user interfaces, and other ESP32-S3-based applications.
Manufacturer
Responsible person
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
The LILYGO TTGO VGA32 V1.4 development board is based on the ESP32 microcontroller and enables VGA video output without requiring an external graphics controller. The board features a VGA connector, PS/2 ports for a keyboard and mouse, a microSD card slot, and Wi-Fi and Bluetooth connectivity. With support for the FabGL library, it can be used to create graphical user interfaces, ANSI/VT terminals, games, and applications displayed on VGA monitors. LILYGO TTGO VGA32 V1.4
No product available!
LILYGO T-Halow V1.0 combines the ESP32-S3 microcontroller with a Wi-Fi HaLow (IEEE 802.11ah) module, an RJ45 Ethernet interface, and a camera connector compatible with OV2640 / OV5640 modules. The board features 16 MB Flash, 8 MB PSRAM, a microSD card slot, an 18650 battery holder. LILYGO T-Halow V1.0 859-894 MHz 875M SAW [H766]
No product available!
IoT communication module with a RISC-V processor, supporting 2.4 GHz WiFi 802.11 b/g/n and Bluetooth 5 Low Energy. Equipped with 4 MB Flash memory, 15 GPIOs and an integrated PCB antenna. It operates from a 3.0 V to 3.6 V supply and is designed for SMD mounting. Espressif ESP32-C3-MINI-1-H4
No product available!
Low-power ESP32-S3 development board in a Feather-compatible format, designed for battery and solar-powered applications. Features 8MB Flash, 2MB PSRAM, Wi-Fi, Bluetooth 5 LE, advanced battery monitoring and support for LiFePO4, Li-ion and LiPo batteries. Elecrow ESP32-S3 PowerFeather V2
The development kit enables applications based on Arduino, Raspberry Pi, or another host controller to connect to AWS IoT Core services. Communication with the host controller is handled through the UART interface and AT commands, while the module manages cloud connectivity, authentication, message exchange, and device management. ESP32-C3-AWS-ExpressLink-DevKit
MCU module combining Wi-Fi and Bluetooth technologies (BR/EDR + BLE). Designed for a wide variety of IoT applications, from sensor networks to more demanding tasks such as voice encoding, music streaming, and MP3 decoding. Espressif ESP32-WROOM-32D 32MBit
Low-power development board based on the ESP32-S3-WROOM-1-N8R8 with WiFi, Bluetooth LE, 8MB Flash, 8MB PSRAM, PCF85063A RTC and onboard Li-Ion/Li-Poly battery charging. Deep-sleep current can be approximately 7µA. No-header version. Soldered 333352
Compact ESP32-C6-MINI-1-N4 development board with WiFi 6, Bluetooth 5.3 LE, Zigbee and Thread connectivity. Features 512KB SRAM, 4MB Flash, USB-C, Qwiic/STEMMA QT and onboard charging for a 3.7V Li-Ion/Li-Poly battery. No-header version. Soldered 333356
Compact development board based on the ESP32-C6-MINI-1-N4 module, equipped with male pin headers and supporting WiFi 6, Bluetooth 5.3 LE, Thread, and Zigbee protocols. It provides 4 MB of Flash memory, 512 KB of SRAM, 6 GPIO lines, a Qwiic/STEMMA QT connector, and support for a 3.7 V Li-ion battery, with dimensions of 25.33 x 25.33 mm. Soldered 333368
Energy-efficient development board based on the ESP32-S3-WROOM-1-N8R8 module, equipped with male pin headers and designed for IoT devices, data loggers, and battery-powered systems. It provides 8 MB of Flash memory, 8 MB of PSRAM, WiFi, Bluetooth LE, a PCF85063A RTC, and a Li-ion/Li-Po battery charger, while Deep Sleep current consumption is only 7 µA. Soldered 333369
Programmer designed for flashing firmware to boards based on ESP32 and ESP8266 microcontrollers that do not have a built-in USB-UART converter. Communication with a computer is handled by the CH340 chip and USB-C connector, while automatic bootloader activation simplifies the programming process. Soldered 333398
ESP32-DEV-KIT-WROVER-IE-M development board with a dual-core Xtensa LX6 processor operating at up to 240MHz, designed for embedded systems and IoT application development. Features an ESP32-WROVER-IE module with 16MB Flash and 8MB PSRAM, 2.4GHz WiFi and Bluetooth connectivity, a USB Type-C port, and a CH343P USB-to-UART converter. Factory pre-soldered pin headers simplify peripheral connections, while the ETA6098 IC supports 3.7V lithium battery charging. Waveshare ESP32-DEV-KIT-WROVER-IE-M
ESP32-DEV-KIT-WROVER-IE development board with a dual-core Xtensa LX6 processor operating at up to 240MHz, designed for embedded systems and IoT application development. Features an ESP32-WROVER-IE module with 16MB Flash and 8MB PSRAM, 2.4GHz WiFi and Bluetooth connectivity, a USB Type-C port, and a CH343P USB-to-UART converter. Supports a 3.7V lithium battery with charging management through the ETA6098 IC. Waveshare ESP32-DEV-KIT-WROVER-IE
Development board featuring an ESP32-WROOM-32UE-N4 module and an SX1276 transceiver for LoRa communication at 868MHz. Provides 5 GPIO connections, two Crowtail/Grove-compatible I2C connector footprints, and a prototyping area with a 2.54mm pitch. Supports power via USB-C or a LiPo battery with charging provided by an integrated controller. Features a 7-pin programming interface, two programmable green LEDs, and a U.FL/IPEX antenna connector. Supports the development of IoT nodes using LoRaWAN, Helium, and Meshtastic with compatible firmware. The kit includes a LoRa antenna and two unsoldered 4-pin connectors. HobbyIoT H2S-Dev v1.2 Basic
Elecrow CrowPanel Advance HMI module with ESP32-S3-WROOM-1-N16R8, a 2.8" 320 × 240px IPS capacitive touchscreen, 8MB PSRAM and 16MB Flash. It provides 2.4GHz Wi-Fi, Bluetooth 5.0 / BLE, microphone, speaker output, RTC and support for replaceable wireless modules. Elecrow DIS01728A-1
Elecrow CrowPanel Advance HMI module with ESP32-S3-WROOM-1-N16R8, a 2.4" 320 × 240px IPS capacitive touchscreen, 8MB PSRAM and 16MB Flash. It provides 2.4GHz Wi-Fi, Bluetooth 5.0 / BLE, microphone, speaker output and support for replaceable wireless modules. Elecrow DIS01624A-1
Advanced development board equipped with a 2.8-inch 240x320 pixel LCD display and 5-point touch control, making it ideal for IoT and HMI applications. With a dual-core 240MHz ESP32-S3 processor, 16MB Flash and 8MB PSRAM, the board supports advanced applications and real-time interactions. Additionally, built-in Wi-Fi, Bluetooth 5.0, a 6-axis sensor, a micro SD slot and battery power make the device versatile and ideal for mobile projects. Waveshare ESP32-S3-Touch-LCD-2.8