zł43.61 tax excl.
The ESP32-S3-LCD-Driver-Board is a comprehensive solution for projects requiring advanced LCD display control and wireless connectivity. Its large memory and high processing power enable the execution of complex graphical interfaces, while the rich set of interfaces offers flexibility in designing IoT applications, control panels, HMI systems, and wearable devices.
Development board based on the ESP32-S3-WROOM-1-N8R8 module featuring a dual-core Xtensa LX7 processor at 240 MHz, designed for controlling LCD displays with SPI or RGB interfaces. Integrated 8 MB Flash and 8 MB PSRAM enable smooth operation of graphic interfaces such as LVGL. The chip supports 2.4 GHz WiFi and Bluetooth LE and is compatible with various development environments, including Arduino IDE and ESP-IDF. The board features two LCD connectors (18-pin SPI and 40-pin SPI+RGB), a lithium battery charging manager (ETA6096), an MX1.25 connector, and a USB-C port. Castellated pins allow the board to be directly soldered onto a main board.
Manufacturer
Responsible person
Development module equipped with two ESP32-S3 microcontrollers, designed for developing USB HID devices that communicate with computers, USB mice, and keyboards. The board features three USB ports, multiple communication and debugging interfaces, and supports the ESP-IDF development framework. MAKCU ESP32-S3
Matter, Thread and Zigbee gateway based on the ESP32-S3 controller and ESP32-H2 module, designed for integrating IoT devices operating in the IEEE 802.15.4 standard. The device features a 2" IPS touch display, camera, motion sensors, USB OTG interface and two HY2.0-4P expansion connectors. Designed for DIN rail mounting, the platform supports Matter, Thread and Zigbee protocols, making it suitable for smart home systems, building automation and sensor network applications. M5Stack K149
Development kit with the ESP32-PICO-V3-ZERO module featuring 2.4 GHz WiFi and Bluetooth LE for designing IoT devices and wireless applications. The board offers Arduino Zero pin compatibility, a built-in USB-to-UART bridge, a PCB antenna, and support for the Amazon Alexa Connect Kit (ACK) platform. Espressif Systems ESP32-PICO-V3-ZERO-DEVKIT
CrowPanel Advance HMI module with an ESP32-S3 microcontroller, a 7" 800 × 480px IPS display and capacitive touchscreen. Equipped with 16MB Flash, 8MB PSRAM, 2.4GHz Wi-Fi, Bluetooth 5 LE, an onboard microphone, RTC, microSD card slot and UART and I2C interfaces. Supports LVGL, Arduino IDE, ESP-IDF and PlatformIO, with wireless connectivity expansion through a replaceable communication module. Version without an acrylic enclosure. Elecrow DIS02170A-1
CrowPanel HMI module with an ESP32-S3 microcontroller, a 7" 800 × 480px TN TFT display and capacitive touchscreen. Equipped with 4MB Flash, 8MB PSRAM, 2.4GHz Wi-Fi, Bluetooth 5 LE, a microSD card slot and UART, I2C and GPIO interfaces. Supports Arduino IDE, ESP-IDF, PlatformIO, MicroPython and the LVGL graphics library. Version without an acrylic enclosure. Elecrow DIS08070H-1
CrowPanel HMI module with an ESP32-S3 microcontroller, a 4.3" 480 × 272px TN TFT display and resistive touchscreen. Equipped with 4MB Flash, 2MB PSRAM, 2.4GHz Wi-Fi, Bluetooth 5 LE, a microSD card slot and UART and GPIO interfaces. Supports Arduino IDE, ESP-IDF, PlatformIO, MicroPython and the LVGL graphics library. Version without an acrylic enclosure, with a touchscreen stylus included. Elecrow DIS06043H-1
Development board based on the ESP32-P4NRW32X microcontroller, featuring a dual-core RISC-V processor running at up to 400MHz and an additional low-power core operating at up to 40MHz. Equipped with 32MB PSRAM, 32MB NOR Flash, MIPI-CSI and MIPI-DSI interfaces, USB 2.0 OTG High Speed, and GPIO expansion headers. Supports hardware image processing and H.264 encoding. Supplied with two factory-soldered 20-pin headers. Waveshare ESP32-P4-Core-DEV-KIT-M
No product available!
Development board based on the ESP32-P4NRW32X microcontroller, featuring a dual-core RISC-V processor running at up to 400MHz and an additional low-power core operating at up to 40MHz. Equipped with 32MB PSRAM, 32MB NOR Flash, MIPI-CSI and MIPI-DSI interfaces, USB 2.0 OTG High Speed, and GPIO expansion connections. Supports hardware image processing and H.264 encoding. Supplied without pre-soldered headers, with two separate 20-pin headers included. Waveshare ESP32-P4-Core-DEV-KIT
No product available!
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. EN variant. Waveshare ESP32-C6-Touch-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and capacitive touch panel. Supports Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4 and integrates a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot and USB-C. Variant supplied with a 3.7V battery. Waveshare ESP32-C6-Touch-LCD-1.54
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery interface; non-touch EN variant. Waveshare ESP32-C6-LCD-1.54-EN
ESP32-C6 development module with a 1.54-inch 240 × 240px IPS LCD and support for Wi-Fi 6, Bluetooth 5 LE and IEEE 802.15.4. Features a QMI8658 6-axis IMU, dual microphones, speaker, TF card slot, USB-C and 3.7V battery support; non-touch version supplied with a 1000mAh battery. Waveshare ESP32-C6-LCD-1.54
Development board based on the ESP32-C3FH4 with a 1.47-inch 172 × 320px LCD, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Version with factory pre-soldered black pin headers, also featuring a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47-M
Development board based on the ESP32-C3FH4 with a 1.47-inch IPS LCD featuring 172 × 320px resolution, 2.4GHz Wi-Fi, Bluetooth 5 LE and a QMI8658 6-axis IMU. Standard version supplied with separate unsoldered pin headers and also equipped with a TF card slot, USB-C and 15 broken-out GPIOs. Waveshare ESP32-C3-LCD-1.47
ESP32-S3R8 development board with a 1.85-inch 360 × 360px LCD capacitive touch display and a CNC-machined aluminum alloy enclosure. Features 2.4GHz Wi-Fi, Bluetooth 5 LE, 8MB PSRAM, 16MB Flash, QMI8658 6-axis IMU, dual microphones, audio circuitry with an output for connecting a speaker and a USB-C interface. Waveshare ESP32-S3-Touch-LCD-1.85B-EN
Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152
The ESP32-S3-LCD-Driver-Board is a comprehensive solution for projects requiring advanced LCD display control and wireless connectivity. Its large memory and high processing power enable the execution of complex graphical interfaces, while the rich set of interfaces offers flexibility in designing IoT applications, control panels, HMI systems, and wearable devices.