ESP32-S3 4.3" Touch LCD dev board Type B with 800x480 touch display - Waveshare 27848
ID: 1194475
5902186320710
zł174.27
Tax included
zł141.68 tax excl.
ESP32-S3-Touch-LCD-4.3B is an advanced development platform with a touchscreen display, designed for rapid prototyping and HMI interface development. With support for Wi-Fi, Bluetooth, multiple communication interfaces, and isolated digital inputs/outputs, it is well-suited for automation systems, industrial devices, access controllers, and operator panels. The availability of an enclosed version and multiple mounting options allows for integration in diverse installation environments.
Description
The ESP32-S3-Touch-LCD-4.3B development board integrates a 4.3-inch IPS display with a 5-point capacitive touchscreen and an ESP32-S3 microcontroller featuring a dual-core Xtensa LX7 processor (up to 240 MHz). It supports Wi-Fi 802.11 b/g/n and Bluetooth 5 LE with an onboard antenna. With 16 MB Flash and 8 MB PSRAM, the board enables smooth operation of graphical interfaces such as LVGL.
The module offers a wide range of communication interfaces, including CAN, RS485, I²C, USB, and isolated digital inputs/outputs. It supports power input from 7–36 V DC and includes a connector for a 3.7 V lithium battery. An integrated RTC with battery backup preserves time data during power loss. Status LEDs indicate power and battery charging states. The open-frame version allows bottom and rear connector mounting, while the boxed version supports rear wiring only.
Features
- Dual-core Xtensa LX7 32-bit processor, up to 240 MHz
- 2.4 GHz Wi-Fi and Bluetooth 5 LE with onboard antenna
- 16 MB Flash, 8 MB PSRAM, 512 KB SRAM, 384 KB ROM
- 4.3″ IPS display, 800×480 resolution, 65K colors
- 5-point capacitive touchscreen, I²C interface
- Power input: 7–36 V DC, integrated voltage regulator
- RTC with battery backup
- Interfaces: CAN, RS485, I²C, USB
- TF card slot, GH1.25 2P lithium battery connector
- 2 digital inputs 5–36 V, opto-isolated (NPN, PNP compatible)
- 2 digital outputs 5–36 V, open-drain, up to 450 mA load
- Status LEDs: power, charging, charging complete
- Selectable VOUT voltage (5 V / 3.3 V)
Included
- ESP32-S3-Touch-LCD-4.3B (with 16-pin rear connector) ×1
- 16-pin screw terminal for bottom mounting ×1
1194475
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
ESP32-S3-LCD-2 is a versatile development board with a 2" display and Wi-Fi/Bluetooth connectivity, which, thanks to its compact size and built-in motion sensor, is suitable for portable graphic applications and IoT projects. Although the OV5640 camera module is not included in the set, the board remains compatible with such solutions, allowing future expansion with image and video capture functions.
zł64.05
24h
Available quantity: 1
Available
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
zł38.93
24h
Available quantity: 3
Available
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
zł288.99
24h
Available quantity: 2
Available
ESP32-S3-Touch-LCD-2.1 in the flat panel version is an advanced platform for developing interactive applications with a touch graphic interface. Thanks to its extensive feature set, including wireless connectivity, PSRAM memory, sensors, and battery power support, it is suitable for mobile devices, HMI interfaces, monitoring systems, and IoT projects.
zł158.36
24h
Available quantity: 2
Available
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8-M
zł36.06
24h
Available quantity: 10
Available
ESP32-S3-POE-ETH enables the development of advanced projects with remote power supply and data transfer capabilities. This solution is especially useful in industrial installations, IP monitoring, control systems, and applications based on ESP32 and the Raspberry Pi ecosystem.
zł85.57
4 weeks
No product available!
ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.
zł35.73
4 weeks
No product available!
A development board featuring the ESP32-C6 WROOM-1-N16 module from Espressif. It features a single-core RISC-V processor and a wide range of connectivity options, including 2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4). The module is Feather-compatible and provides 23 GPIO pins on 2.54 mm pitch connectors. SparkFun DEV-22924
zł114.89
3 weeks
No product available!
Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575
zł57.17
24h
Available quantity: 3
Available
ESP32-S3-LCD-1.47 is a versatile development board equipped with a color display, support for Wi-Fi, Bluetooth, and 16 MB of Flash memory. Thanks to its rich hardware resources and compatibility with development libraries, it provides a solid platform for creating modern HMI interfaces, IoT devices, and interactive applications.
zł53.53
24h
Available quantity: 3
Available
ESP32-S3-Touch-AMOLED-2.06 is a complete development platform for designing wearable devices with an AMOLED display, touch control, audio, wireless connectivity, and AI features. Thanks to its compact design and built-in battery, it is suitable as a foundation for smartwatches, data loggers, and IoT devices.
zł144.30
6 weeks
No product available!
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
zł25.35
24h
Available quantity: 64
Available
The ESP32-S3-DevKitC-1-N8R2 is an advanced development board with the ESP32-S3-WROOM-1/1U module, offering versatile wireless connectivity with support for 2.4 GHz WiFi and Bluetooth LE 5.0. With high computational power, ample memory, and a wide range of interfaces, this board is perfect for a variety of applications, including IoT, automation, and smart agriculture. Espressif Systems ESP32-S3-DevKitC-1-N8R2
zł99.90
1 weeks
No product available!
ESP32 module board equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with a metal housing. Waveshare ESP32-S3-LCD-1.28-B
zł92.79
24h
Available quantity: 6
Available
ESP32-S3-Touch-LCD-2 is a compact development module with an IPS touch screen, IMU sensor, and wireless communication support, designed for IoT, HMI, and interactive user interface projects. Ready for expansion with a camera module, it provides a flexible platform for building devices with touch control, data acquisition, and remote communication functions.
zł77.07
4 weeks
No product available!
Development board with WiFi and Bluetooth module Espressif ESP32-WROVER. It is equipped with a microSD card slot, a USB-UART converter and a Li-Ion battery charging system. TTGO T8 V1.1 ESP32
zł76.09
24h
Available quantity: 4
Available
ESP32-S3-Touch-LCD-4.3B is an advanced development platform with a touchscreen display, designed for rapid prototyping and HMI interface development. With support for Wi-Fi, Bluetooth, multiple communication interfaces, and isolated digital inputs/outputs, it is well-suited for automation systems, industrial devices, access controllers, and operator panels. The availability of an enclosed version and multiple mounting options allows for integration in diverse installation environments.